ELECTRONIC INDUSTRIAL CONTROLS MECHANIC

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.

01QUALIFICATIONS

Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2600, Electronic Equipment Installation and Maintenance Family, Electronic Industrial controls Mechanic.

Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.

The screen out element for this position is the ability to do the work of the ELECTRONIC INDUSTRIAL CONTROLS MECHANIC position without more than normal supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1.

Comprehensive knowledge of the operation, capabilities, and limitations of complex electronic systems complicated by a variety of multi-component assemblies and devices; knowledge of electronic theory and circuits and basic logic circuits for power, timing, and motion controls, indicating and counting mechanisms, and similar devices; knowledge of Boolean algebra to construct truth tables and logic equations for analysis of logic circuits; and knowledge of related electrical, mechanical, optical, pneumatic, and hydraulic systems.

1. Knowledge of safety, environmental, and security regulations, practices, and procedures. 3. Knowledge of regulations, procedures, and policies related to records maintenance and documentation. 4. Skill in troubleshooting electronic problems on large projects and applying test procedures; and in the use of hand and power tools of the electronics trade to include a variety of electronic, electrical, or electromechanical test and measurement equipment. 5.

Ability to test, calibrate, troubleshoot, overhaul, repair, and install complete electronic systems. 6. Ability to read and interpret a variety of technical data, such as schematics, diagrams, and technical orders relating to the electronics trade Physical Effort: Work assignments require moderate physical effort. Mechanics frequently lift, carry, or otherwise handle items weighing up to 18 kilograms (40 pounds). Occasionally they handle items greater than 18 kilograms.

Assistance is usually available with heavy items. They work in a sitting position for extended periods. Frequent standing, walking, bending, crouching, reaching, and stooping is required. Occasionally, climbing and working in high places may be required.

02Working Conditions

Work is usually performed inside in well lighted, heated, and ventilated areas. When equipment is fixed in place it is sometimes necessary to work in warehouse or industrial areas exposed to loud noises, heat or cold, fumes, etc. Mechanics are subject to injuries, such as electric shock, cuts and bruises, as well as burns caused by electrical energy or soldering irons. The mechanic may be required to work in cramped positions or in close proximity to energized or operating machinery.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social).

Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.

• Plans and lays out work from electrical and electronic block diagrams, wiring diagrams, schematics, and technical orders.
• Reviews work order requirements reflecting systems to be overhauled, repaired, fabricated, or modified.
• Performs pretest, operational (functional), and final testing; final tuning; alignment; and/or calibration of highly complex electronic systems, components, and/or subassemblies.

Tests and diagnoses problems in linear electronics control equipment, identifying any malfunctions and the repair required. Installs, overhauls, repairs, fabricates, and/or modifies electronically controlled industrial systems, components, and/or subassemblies.

Works on multiple axis numerically controlled (NC) machine tools with continuous path or contouring control capability, computer controlled warehousing/stock-handling equipment, and centralized energy management and control systems (EMCS) which use special purpose, dedicated computers to store operating parameters and initiate adjustments. Performs preventive maintenance on electronic control systems to include disassembly, cleaning, reassembly, and calibration.

Develops and implements service and maintenance schedules and procedures for the systems and associated components based on a comprehensive knowledge of operating principles, trade practice, and manufacturer's recommendations. Applies knowledge of the operation or industrial processes performed by the equipment in order to evaluate the operation of the equipment.

Utilizes safety and security practices and procedures following established rules and regulations and maintains a safe, clean, and secure work environment. Uses and assures proper fit of required safety equipment and clothing. Follows federal and state rules when storing, using, handling, labeling, and disposing of hazardous materials and waste in accordance with environmental standards.