Mechanical Design Engineer BEV Chassis Integration
Hykmann Global Business Solutions AB is hiring for the position of Mechanical Design Engineer BEV Chassis Integration in Stockholm, Sweden. The listing describes it as a full-time position with on-site working.
DGJ summary of this job
Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.
Hykmann Global Business Solutions AB is hiring for the position of Mechanical Design Engineer BEV Chassis Integration in Stockholm, Sweden. The listing describes it as a full-time position with on-site working.
From the advert, the main requirements are 3+ years of experience and English language skills.
The advert names CAD as a skill for this role.
The employer does not state a salary in this listing; DGJ Insight below shows an official pay benchmark for the place where one exists.
Visa sponsorship is not mentioned. Applicants from outside Sweden should check the official work permit route before applying.
Dev Global Jobs found this job on Arbetsförmedlingen (JobTech) on Nov 7, 2026; applications close on Dec 7, 2026.
- Employer
- Hykmann Global Business Solutions AB
- Location
- Stockholm, Sweden
- Work mode
- on-site
- Job type
- Full-time
- Pay
- Not stated by the employer
- Experience asked
- 3+ years
- Languages asked
- English
- Found
- Nov 7, 2026 on Arbetsförmedlingen (JobTech)
- Closes
- Dec 7, 2026
- Employer text
- 748 words, about 3 min to read
- Apply only on the official page (hykmann.com). Dev Global Jobs is not the employer and never asks for a fee.
- Compare your own experience with the 3+ years the advert asks for, and show it clearly near the top of your CV.
- Mirror the skills the advert names (CAD) in your CV where you really have them; applicant tracking systems look for these words.
- Say your level in English plainly (for example B2 or C1).
- Plan to apply before Dec 7, 2026.
- Read the employer’s full text below (about 3 min) before you apply.
- Build or check your CV with the free DGJ CV Builder.
DGJ Insight
Our own data about this role and place, from official statistics and our live job index.
Source: OECD Average annual wages, 2025
UN living-cost index for Sweden (ICSC post adjustment 37.6), as of 1 Oct 2026.
Source: ICSC post adjustment classifications (icsc.un.org)
- Work permit: Job offer with terms equal to Swedish collective agreements; new salary threshold
- EU Blue Card: Degree and salary threshold
- Job seeker permit for highly qualified: Advanced degree, up to 9 months
Official routes: Swedish Migration Agency
About the role
Full text from the employer, as published on Arbetsförmedlingen (JobTech), arranged into sections. Nothing added or removed.
🚀 We’re Hiring: Design Engineer, BEV Chassis Integration | CATIA V5
Company: Hykmann Global Business Solutions AB
Role: Mechanical Design Engineer, BEV Chassis Integration
Specialisation: Mechanical Design | Chassis Integration | Sheet Metal Design | Pneumatic Systems | CATIA V5
Experience: 3+ years of relevant experience
Location: Södertälje, Sweden
Work Model: On-site (100%)
Assignment Period: 1 December 2026, 29 December 2028
Language: English
About the Role
Hykmann Global Business Solutions AB is looking for an experienced Mechanical Design Engineer to contribute to the development and integration of components and systems for Battery Electric Vehicle (BEV) chassis solutions.
You will work on mechanical design, component integration and installation solutions within heavy-duty vehicle platforms, with a particular focus on sheet metal components, brackets, pneumatic systems and chassis packaging.
The role involves working with advanced CAD tools, developing detailed 3D and 2D designs, coordinating with suppliers and collaborating with cross-functional engineering teams to deliver technically robust and production-ready solutions.
Key Responsibilities
1. Mechanical Design & Component Development
- Design and develop mechanical components and installation solutions for BEV chassis applications.
- Develop sheet metal components, brackets and mounting solutions.
- Design and integrate pneumatic components and installation systems.
- Create detailed 3D models and 2D engineering drawings using CATIA V5.
- Ensure designs comply with applicable engineering standards and technical requirements.
- Perform tolerance analysis and ensure dimensional accuracy.
2. Chassis Integration & Component Packaging
- Work with component packaging, interfaces and installation requirements.
- Ensure effective integration of mechanical and pneumatic components within vehicle chassis architectures.
- Evaluate installation space, clearances, interfaces and mounting requirements.
- Develop practical design solutions considering functionality, manufacturability and serviceability.
- Support the integration of components within electric vehicle chassis platforms.
3. Supplier & Cross-Functional Collaboration
- Collaborate with suppliers and multidisciplinary engineering teams throughout the design and development lifecycle.
- Participate in technical discussions, design reviews and engineering coordination activities.
- Support supplier interactions and resolve technical design-related challenges.
- Coordinate design requirements and ensure alignment across relevant stakeholders.
4. Verification, Documentation & Continuous Improvement
- Support design reviews, validation activities and technical investigations.
- Prepare and maintain engineering drawings, specifications and technical documentation.
- Support manufacturing and production-related activities when required.
- Contribute to design optimization, knowledge sharing and continuous improvement initiatives.
Required Skills & Experience
- Bachelor's or Master's degree in Mechanical Engineering, Automotive Engineering or a related engineering discipline.
- Minimum 3 years of relevant mechanical design engineering experience.
- Previous R&D experience with Scania/Hero or the relevant TRATON organization is mandatory.
- Strong practical experience in one or more of the following areas:
- Sheet metal design and development.
- Brackets and mechanical installation solutions.
- Pneumatic components and installation systems.
- Component packaging and chassis integration.
- Proficiency in CATIA V5, including 3D modelling and 2D engineering drawings.
- Experience with tolerance analysis and dimensional engineering.
- Good understanding of component interfaces, packaging and installation requirements.
- Knowledge of design for manufacturing and manufacturability principles, particularly for sheet metal, plastic and/or pneumatic components.
- Ability to develop practical and technically sound mechanical design solutions.
- Good communication and collaboration skills.
- Fluency in English, both written and spoken.
Meritorious Experience
Experience in the following areas will be highly advantageous:
- Heavy-duty vehicle chassis design and integration.
- Battery Electric Vehicle (BEV) development.
- Truck chassis component integration and installation.
- Sheet metal component design and manufacturing.
- Pneumatic system design and integration.
- Supplier coordination and technical design reviews.
- Vehicle packaging, mounting interfaces and tolerance management.
- Production support and engineering documentation.
What We’re Looking For
We are looking for a proactive and technically capable Mechanical Design Engineer who can independently drive design activities and contribute to complex vehicle integration projects.
The ideal candidate should have practical experience in heavy-duty vehicle development, strong CATIA V5 capabilities and a solid understanding of mechanical design principles.
You should be comfortable collaborating with suppliers, engineering teams and other stakeholders while taking ownership of technical deliverables, solving design challenges and sharing knowledge with colleagues.
Important Information
- Previous R&D experience with the specified heavy-duty vehicle OEM/group is mandatory.
- The position is 100% on-site in Södertälje.
- CV must be submitted in English.
- A background check will be conducted before the start of the employment/assignment.
- Candidate selection will take place continuously.
- There may be opportunities for an extension beyond the stated period.
Interested in This Opportunity?
Are you an experienced Mechanical Design Engineer with CATIA V5 expertise and a background in heavy-duty vehicle development?
We would be happy to hear from you!
Apply directly through our careers page:
🌐 https://www.hykmann.com/careers
Company: Hykmann Global Business Solutions AB
🌐 https://hykmann.com
#Hiring #MechanicalDesignEngineer #DesignEngineer #CATIAV5 #BEV #ElectricVehicles #ChassisIntegration #AutomotiveEngineering #SheetMetalDesign #Pneumatics #MechanicalEngineering #VehicleIntegration #TruckEngineering #CADDesign #SödertäljeJobs #SwedenJobs #Hykmann
Ask CSI about this job
Answers link to jobs and tools on Dev Global Jobs.
Review Dev Global Jobs
Used this site to find a job? Tell other job seekers what worked and what did not.