Electrical Equipment Repairer
Veterans Health Administration is hiring for the position of Electrical Equipment Repairer in Los Angeles, California, United States. The listing describes it as a full-time position.
DGJ summary of this job
Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.
Veterans Health Administration is hiring for the position of Electrical Equipment Repairer in Los Angeles, California, United States. The listing describes it as a full-time position.
Pay stated in the listing: $33.93 - $39.53 per hour.
Visa sponsorship is not mentioned. Applicants from outside United States should check the official work permit route before applying.
Dev Global Jobs found this job on USAJobs on Nov 13, 2026; applications close on Nov 20, 2026.
- Employer
- Veterans Health Administration
- Location
- Los Angeles, California, United States
- Job type
- Full-time
- Pay
- $33.93 - $39.53 per hour
- Found
- Nov 13, 2026 on USAJobs
- Closes
- Nov 20, 2026
- Employer text
- 821 words, about 4 min to read
- Apply only on the official page (usajobs.gov). Dev Global Jobs is not the employer and never asks for a fee.
- Plan to apply before Nov 20, 2026.
- Read the employer’s full text below (about 4 min) before you apply.
- Build or check your CV with the free DGJ CV Builder.
DGJ Insight
Our own data about this role and place, from official statistics and our live job index.
This job's listed pay is 14% below the benchmark.
Source: OECD Average annual wages, 2025
- H-1B specialty occupation: Employer petition, bachelor's degree or higher in the specialty; annual cap and lottery
- L-1 intracompany transferee: Employees of a related company abroad transferring to a US office
- O-1 extraordinary ability: Evidence of extraordinary ability in sciences, arts, education, business or athletics
Official routes: USCIS
About the role
Full text from the employer, as published on USAJobs, arranged into sections. Nothing added or removed.
To qualify for this position, applicants must meet all requirements by the closing date of this announcement, 11/20/2026.
01EXPERIENCE
A specific length of training and experience is not required, but you must show evidence of training or experience of sufficient scope and quality of your ability to do the work of this position. Evidence which demonstrates you possess the knowledge, skills, and ability to perform the duties of this position must be supported by detailed descriptions of such on your resume. Applicants will be rated in accordance with the OPM Federal Wage System Qualification Standards.
SCREEN-OUT ELEMENT: Your qualifications will first be evaluated against the prescribed screen out element, which usually appears as question 1 in the on-line questionnaire. Those applicants who appear to possess at least the minimal acceptable qualification requirement are considered for further rating; those who do not are rated ineligible and are eliminated.
The potential eligibles are then rated against the remainder of the Job Elements: Electric Drawings Electrical Equipment Technical Practices Technical Practices (Electrical Electronic) Troubleshooting (Electrical) Use and Maintain Hand Tools (Electrical Work) Without more than normal supervision Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religions; spiritual; community; student; social).
Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Note: A full year of work is considered to be 35-40 hours of work per week. Part-time experience will be credited on the basis of time actually spent in appropriate activities.
Applicants wishing to receive credit for such experience must indicate clearly the nature of their duties and responsibilities in each position and the number of hours a week spent in such employment. Physical Requirements/Working Conditions: The position requires frequent physical exertion in the performance of assigned duties. Work involves prolonged standing and walking on hard surfaces, as well as frequent bending, stooping, kneeling, climbing, reaching, and working in confined or awkward positions.
The incumbent routinely lifts, carries, and moves equipment, tools, parts, and materials weighing up to 40 pounds without assistance. Heavier items are moved with the use of material-handling equipment or with assistance from other personnel. Physical stamina, agility, and dexterity are necessary to safely perform maintenance, repair, and installation tasks in a variety of operational environments.
02Preferred Experience
Includes industrial electrical and electronic systems maintenance and repair, with demonstrated skill in diagnosing and troubleshooting electrical and electronic equipment using schematics, diagrams, and technical documentation. Candidates should possess the ability to safely work on electrical systems operating at voltages up to 600 volts and have a strong understanding of mechanical systems and their integration with electrical controls.
Experience with motors, motor control systems, variable frequency drives (VFDs), pneumatic systems, and network communications is highly desirable. Familiarity with pneumatic tube transport systems and related equipment is also preferred.
Duties Include, But Are Not Limited To: Perform testing, troubleshooting, modification, repair, and overhaul of complex electrical and electronic equipment using blueprints, schematics, engineering drawings, and manufacturer specifications.
Conduct preventive, routine, and emergency maintenance on building service systems including automated material transport systems, sterilization washers, pneumatic tube systems, elevators, pumps, air compressors, vacuum systems, ventilation systems, conveyors, relay systems, and automated control equipment. Diagnose and repair electrical, electronic, hydraulic, pneumatic, and mechanical components, including motors, transformers, coils, bearings, gears, wiring, solenoids, relays, and control systems.
Maintain and repair pneumatic tube systems by troubleshooting equipment failures, replacing motors and control boards, decontaminating systems following spills, and removing jammed carriers. Monitor, replenish, and maintain chemicals used in sterilization and decontamination processes; troubleshoot and repair automated sterilization and washer systems, including steam and water lines, heat exchangers, and programmable logic controllers (PLCs).
Test electrical and electronic equipment for continuity, voltage drop, ground faults, open circuits, overheating, and other system malfunctions. Inspect, repair, and adjust mechanical components such as reduction gearboxes, clutches, shafts, bearings, governors, switches, capacitors, rectifiers, and variable resistors to ensure proper operation. Fabricate, recondition, and replace obsolete parts and components for conveyor and other facility systems using machine shop equipment such as lathes and milling machines.
Modify, restore, and return equipment to operational status utilizing electrical, electronic, mechanical, and steam-fitting techniques. Utilize specialized diagnostic and testing equipment, including voltmeters, ohmmeters, meggers, oscilloscopes, frequency counters, resistance bridges, and capacitance/inductance testers to identify faults at the component level on printed circuit boards.
Measure tolerances, clearances, and dimensional characteristics using precision instruments such as micrometers, dial indicators, feeler gauges, depth gauges, and tension gauges; adjust equipment controls and perform operational performance testing. Set up, program, and operate computer-controlled Automatic Test Equipment (ATE) to conduct diagnostic testing, pre-operational inspections, and final system performance verification of electrical and electronic systems.
Work Schedule: Monday-Friday from 7:00am-3:30pm Position Description Title/PD#: Electrical Equipment Repairer/PD10679A Critical Skills Incentive (CSI): Not approved Relocation/Recruitment Incentives: Not authorized
Ask CSI about this job
Answers link to jobs and tools on Dev Global Jobs.
Review Dev Global Jobs
Used this site to find a job? Tell other job seekers what worked and what did not.