Dev Global Jobs
Government · Technology

Mechanical Engineer

US Army Civilian Human Resources AgencyPortland, Oregon, United StatesFull-time$56,039 - $104,610 per yearPosted Nov 13, 2026Closes Nov 27, 2026

US Army Civilian Human Resources Agency is hiring for the position of Mechanical Engineer in Portland, Oregon, United States. The listing describes it as a full-time position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

US Army Civilian Human Resources Agency is hiring for the position of Mechanical Engineer in Portland, Oregon, United States. The listing describes it as a full-time position.

From the advert, the main requirements are 1+ years of experience.

The advert names curriculum as a skill for this role.

Pay stated in the listing: $56,039 - $104,610 per year.

Visa sponsorship is not mentioned. Applicants from outside United States should check the official work permit route before applying.

Dev Global Jobs found this job on USAJobs on Nov 13, 2026; applications close on Nov 27, 2026.

Employer
US Army Civilian Human Resources Agency
Location
Portland, Oregon, United States
Job type
Full-time
Pay
$56,039 - $104,610 per year
Experience asked
1+ years
Found
Nov 13, 2026 on USAJobs
Closes
Nov 27, 2026
Employer text
1,196 words, about 5 min to read
Skills named in the advert
curriculum
Before you apply
  • Apply only on the official page (usajobs.gov). Dev Global Jobs is not the employer and never asks for a fee.
  • Compare your own experience with the 1+ years the advert asks for, and show it clearly near the top of your CV.
  • Mirror the skills the advert names (curriculum) in your CV where you really have them; applicant tracking systems look for these words.
  • Plan to apply before Nov 27, 2026.
  • Read the employer’s full text below (about 5 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 15, 2026
Pay benchmark
Average wage, United States
$86,977 average / year

This job's listed pay is 8% below the benchmark.

This job: $56,039 to 104,610

Source: OECD Average annual wages, 2025

Work permit route
  • H-1B specialty occupation: Employer petition, bachelor's degree or higher in the specialty; annual cap and lottery
  • L-1 intracompany transferee: Employees of a related company abroad transferring to a US office
  • O-1 extraordinary ability: Evidence of extraordinary ability in sciences, arts, education, business or athletics

Official routes: USCIS

Job description

About the role

Full text from the employer, as published on USAJobs, arranged into sections. Nothing added or removed.

Who May Apply: US Citizens In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience.

Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Mechanical Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering.

To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

Degree must be completed by December 2026. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1.

Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2.

Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above.

The courses must be fully acceptable toward meeting the requirements of an engineering program. 4.

Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes assisting in the design and development of mechanical engineered devices, equipment or systems using established criteria or specifications; or, assisting in the inspection and evaluation of mechanical engineered projects and resources; or assisting in identifying mechanical engineering problems and recommending corrective action.

This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05). OR Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering.

OR Superior Academic Achievement: Successful completion (or completion no later than December 2026) of all the requirements for a bachelor's degree with Superior Academic Achievement (S.A.A.). In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above.

Superior Academic Achievement is based on: (1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR (2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR (3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achshonor.org/).

NOTE: Grade point averages will be rounded to one decimal point. For example, 2.95 will round to 3.0, and 2.94 will round to 2.9. NOTE: If more than 10 percent of your undergraduate course work (credit hours) was taken on a pass/fail or similar basis, your S.A.A. claim must be based on class standing or membership in an honor society and you must provide evidence of your class standing or honor society membership with your application.

OR 5-Year Engineering Program: Successful completion (or completion by December 2026) of a 5-year program of study (i.e., one designed to be completed in no less than 5 years) of at least 160 semester hours leading to a bachelor's degree in engineering in an ABET accredited college or university. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%.

To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.

Assist in the design and development of mechanical engineered components, equipment or systems using established criteria or specifications.,Assist in the inspection and evaluation of mechanical engineered projects, systems, operational equipment and resources.,Identify mechanical engineering problems and recommend corrective action.,Perform computations and modeling to develop technical mechanical engineering project design documents, computations, and submittals.,Prepare technical mechanical engineering reports and studies with completeness, technical adequacy, and adherence to prescribed format of reports.

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗