Dev Global Jobs
Government · Business

AIR CONDITIONING EQUIPMENT MECHANIC

United States Space ForcePeterson AFB, Colorado, United StatesFull-time$66,179 - $77,199 per yearPosted Nov 16, 2026Closes Nov 23, 2026

United States Space Force is hiring for the position of AIR CONDITIONING EQUIPMENT MECHANIC in Peterson AFB, Colorado, United States. The listing describes it as a full-time position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

United States Space Force is hiring for the position of AIR CONDITIONING EQUIPMENT MECHANIC in Peterson AFB, Colorado, United States. The listing describes it as a full-time position.

Pay stated in the listing: $66,179 - $77,199 per year.

Visa sponsorship is not mentioned. Applicants from outside United States should check the official work permit route before applying.

Dev Global Jobs found this job on USAJobs on Nov 16, 2026; applications close on Nov 23, 2026.

Employer
United States Space Force
Location
Peterson AFB, Colorado, United States
Job type
Full-time
Pay
$66,179 - $77,199 per year
Found
Nov 16, 2026 on USAJobs
Closes
Nov 23, 2026
Employer text
949 words, about 4 min to read
Before you apply
  • Apply only on the official page (usajobs.gov). Dev Global Jobs is not the employer and never asks for a fee.
  • Plan to apply before Nov 23, 2026.
  • Read the employer’s full text below (about 4 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 17, 2026
Pay benchmark
Average wage, United States
$86,977 average / year

This job's listed pay is 18% below the benchmark.

This job: $66,179 to 77,199

Source: OECD Average annual wages, 2025

Work permit route
  • H-1B specialty occupation: Employer petition, bachelor's degree or higher in the specialty; annual cap and lottery
  • L-1 intracompany transferee: Employees of a related company abroad transferring to a US office
  • O-1 extraordinary ability: Evidence of extraordinary ability in sciences, arts, education, business or athletics

Official routes: USCIS

Job description

About the role

Full text from the employer, as published on USAJobs, arranged into sections. Nothing added or removed.

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.

01QUALIFICATIONS

Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-5300 Industrial Equipment Maintenance Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying.

Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is the ability to do the work of the position without more than normal supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of the construction and operation of a variety of large commercial and complex industrial systems. 2.

Knowledge of safety regulations, practices, and procedures. 3. Skill in dismantling, repairing, and reassembling pumps, impellers, compressors, chillers, receivers, and evaporators. 4. Skill in maintaining difficult balances of a variety of refrigerant controls and complicated motor controls. 5. Knowledge of the principles and theories of air conditioning and refrigeration and properties of refrigerants. 6. Skill in the use of hand tools, power tools, and a variety of test equipment. 7.

Skill in troubleshooting complex problems on large projects applying prescribed test procedures and equipment. 8. Ability to interpret instructions, specifications, etc. (including blueprint reading). 9.

Comprehensive knowledge of the operation, capabilities, and limitations of complex electronic systems complicated by a variety of multi-component assemblies and devices; knowledge of electronic theory and circuits and basic logic circuits for power, timing, and motion controls, indicating and counting mechanisms, and similar devices; knowledge of Boolean algebra to construct truth tables and logic equations for analysis of logic circuits; and knowledge of related electrical, mechanical, optical, pneumatic, and hydraulic systems 10.

Skill in troubleshooting electronic problems on large projects and applying test procedures; and in the use of hand and power tools of the electronics trade to include a variety of electronic, electrical, or electromechanical test and measurement equipment. 11. Ability to test, calibrate, troubleshoot, overhaul, repair, and install complete electronic systems. 12.

Ability to read and interpret a variety of technical data, such as schematics, diagrams, and technical orders relating to the electronics trade Physical Effort: The employee lifts, carries, and handles equipment up to 50 pounds unassisted and over 50 pounds with assistance. Works from ladders, scaffolding platforms, or cramped areas where equipment, parts, or tools are hard to reach. Work requires frequent stooping, stretching, bending, kneeling, and working in tiring, uncomfortable positions for long periods.

In addition, work involves frequent movement and maneuvering of large, heavy equipment using hoists, holders, and pulleys as required. Work assignments require moderate physical effort. Mechanics frequently lift, carry, or otherwise handle items weighing up to 18 kilograms (40 pounds). Occasionally they handle items greater than 18 kilograms. Assistance is usually available with heavy items. They work in a sitting position for extended periods.

Frequent standing, walking, bending, crouching, reaching, and stooping is required. Occasionally, climbing and working in high places may be required.

02Working Conditions

The employee works indoors and outdoors, on elevated structures, and in cramped areas. Subject to discomfort from face masks or other protective devices when there is a possibility of exposure to toxic refrigerants, noxious gases, fumes, or acids. Subject to possible burns from refrigerants. Works near moving parts of equipment and machinery, energized electrical circuits, sharp metal edges, loud noises, and toxic fumes, which could cause cuts, burns, and respiratory ailments.

May be subject to sudden and frequent temperature changes. Work is usually performed inside in well lighted, heated, and ventilated areas. When equipment is fixed in place it is sometimes necessary to work in warehouse or industrial areas exposed to loud noises, heat or cold, fumes, etc. Mechanics are subject to injuries, such as electric shock, cuts and bruises, as well as burns caused by electrical energy or soldering irons.

The mechanic may be required to work in cramped positions or in close proximity to energized or operating machinery. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social).

Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.

  • The employee repairs and maintains a variety of large commercial and industrial refrigeration and air conditioning systems and supporting equipment with complex problems and extensive repairs requiring judgment to locate malfunctions. - Plans, lays out, and installs a variety of large complex commercial and industrial systems and supporting equipment used to condition air in warehouses, shops, hangars, hospitals, and large office buildings. - Troubleshoots a variety of large commercial and industrial refrigeration and air conditioning systems and supporting equipment. Installs, overhauls, repairs, fabricates, and/or modifies electronically controlled industrial systems, components, and/or subassemblies. - Utilizes established safety practices, rules, regulations, and procedures to maintain a safe and clean work environment. - Utilizes safety and security practices and procedures following established rules and regulations and maintains a safe, clean, and secure work environment.
CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗