Dev Global Jobs
Technology

Mechanical Design Engineer - Power Systems

Husqvarna ABJönköping, SwedenFull-timeSalary not listed · Typical pay in SwedenPosted Nov 17, 2026Closes Dec 8, 2026

This listing is for a Mechanical Design Engineer - Power Systems role at Husqvarna AB, in Jönköping, Sweden. It is listed as a full-time position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

This listing is for a Mechanical Design Engineer - Power Systems role at Husqvarna AB, in Jönköping, Sweden. It is listed as a full-time position.

Reading the advert, the employer asks for 3+ years of experience and English and Swedish language skills.

The advert names CAD as a skill for this role.

No salary is given in this listing, so check the official pay figures in the DGJ Insight section below where they exist.

The advert does not mention visa sponsorship. If you would move to Sweden for this job, check the official work permit route first (DGJ Insight lists it where we have it).

Dev Global Jobs found this job on Arbetsförmedlingen (JobTech) on Nov 17, 2026; applications close on Dec 8, 2026.

Employer
Husqvarna AB
Location
Jönköping, Sweden
Job type
Full-time
Pay
Not stated by the employer
Experience asked
3+ years
Languages asked
English and Swedish
Found
Nov 17, 2026 on Arbetsförmedlingen (JobTech)
Closes
Dec 8, 2026
Employer text
750 words, about 3 min to read
Skills named in the advert
CAD
Before you apply
  • Apply only on the official page (husqvarnagroup.wd3.myworkdayjobs.com). Dev Global Jobs is not the employer and never asks for a fee.
  • Compare your own experience with the 3+ years the advert asks for, and show it clearly near the top of your CV.
  • Mirror the skills the advert names (CAD) in your CV where you really have them; applicant tracking systems look for these words.
  • Say your level in English and Swedish plainly (for example B2 or C1).
  • Plan to apply before Dec 8, 2026.
  • Read the employer’s full text below (about 3 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 17, 2026
Pay benchmark
Average wage, Sweden
SEK 546,171 average / year

Source: OECD Average annual wages, 2025

Cost of living · Sweden
78.4 vs New York = 100

UN living-cost index for Sweden (ICSC post adjustment 37.6), as of 1 Nov 2026.

Source: ICSC post adjustment classifications (icsc.un.org)

Work permit route
  • Work permit: Job offer with terms equal to Swedish collective agreements; new salary threshold
  • EU Blue Card: Degree and salary threshold
  • Job seeker permit for highly qualified: Advanced degree, up to 9 months

Official routes: Swedish Migration Agency

Job description

About the role

Full text from the employer, as published on Arbetsförmedlingen (JobTech), arranged into sections. Nothing added or removed.

We’re one of the world’s oldest start-ups, and we’re just getting started.

At Husqvarna Group, innovation is in our DNA. With over 330 years of heritage and a passion for pioneering technology, we design and deliver world class products and solutions for forest, park, garden and construction care. We develop next-generation handheld products where performance, usability, and environmental responsibility are key. At the heart of these products is the powertrain-and that’s where you come in.

01Join our Base Engine team in Power Systems

We are now looking for a Mechanical Design Engineer to join the Base Engine group within Power Systems, part of Handheld R&D. Power Systems is responsible for developing the powertrains in our products. In this team we focus on petrol-powered handheld products, developing engines and engine components for our 2-stroke engines, including cylinder, piston, crankshaft and bearings.

Base Engine is a team of around 11 design engineers, some with specialist areas, who work together to develop the next generation of handheld products for forestry and urban environments. We work with the full life cycle of a component, from the first idea to product care.

02About the role

As a Design Engineer you take responsibility for your own complex components and drive them forward. You will work with both new product development and product care:

  • Develop and design components for new products, for example a new chainsaw, and make sure they fit in the whole product and meet new product requirements
  • Create 2D and 3D drawings and manage design changes, including tooling changes
  • Carry out root cause analyses to understand why failures occur in complex systems
  • Participate in regular sync meetings with your platform lead, for example to discuss changes of supplier for a component
  • Work closely with neighbouring design engineers, test and verification, manufacturing and suppliers

In our different product value streams you work together with a platform lead and look at the product as a whole, not only at the component level. This is a cross-functional role with many internal contact points, and you will need to manage several tasks in parallel. You will have support from experienced colleagues, and we encourage you to ask for help when you need it.

03About you

You’re proactive, curious and take great ownership of your components. You enjoy digging into technical details and complex systems. You are structured and know how to plan your work, keep track of timelines and drive your own tasks forward, while being a good team player who is not afraid to ask for support. You communicate clearly and are comfortable making decisions and recommending next steps.

04Your skills and background

  • Degree in Mechanical Engineering
  • At least 3 years of professional experience in mechanical engineering or product development
  • Experience in mechanical design and in creating 2D and 3D drawings
  • Experience with CAD tools such as CATIA V5 and PLM (e.g. Teamcenter)
  • Ability to plan, structure and prioritize your own work
  • Fluent in English and Swedish
  • Meriting: knowledge of combustion engine technology, especially 2-stroke engines
  • Meriting: experience with casting, metal machining, geometry assurance or cost management

05Location

This position is placed in Huskvarna

06How we work

We believe the best ideas happen when we're connected. We spend most of our time together in the office, creating space for collaboration, creativity, and fast decision-making. This is consistent across all our global offices and helps us maintain a strong culture, support learning and development, and ensure everyone has access to the people and resources they need to thrive.

07Your Application

Apply as soon as possible. We are screening on an ongoing basis and will fill this position as soon as we have found the right person. For more information about the position, contact hiring manager Hilda Lindstrand at . For questions regarding the process, please contact Talent Acquisition Partner Kristin Sundlo at .

Processing of personal data

When you send in your application we will process your personal data. In case we choose to proceed with your application, we may ask you to verify your identity before giving you a job offer.

For more information about how we process your personal data, who we may share it with and your rights, please see our privacy notice: https://privacyportal.husqvarnagroup.com/en/privacy-notice

08Winning Through Culture

We believe that business is ultimately about people, as a team, we win and grow together. Our culture is built on bold ideas, strong commitment, and a shared purpose, creating an environment where innovation thrives, people grow, and every contribution matters.

Learn more about our culture here: https://www.husqvarnagroup.com/en/our-culture

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗