Dev Global Jobs
Engineering

Junior Electrical Engineer

pplwiseMunich, GermanyFull-timeSalary not listed · Typical pay in GermanyPosted Nov 17, 2026

pplwise has an opening for a Junior Electrical Engineer in Munich, Germany. The listing describes it as a full-time, entry-level position with hybrid working.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

pplwise has an opening for a Junior Electrical Engineer in Munich, Germany. The listing describes it as a full-time, entry-level position with hybrid working.

The advert names Linux as a skill for this role.

The employer does not state a salary in this listing; DGJ Insight below shows an official pay benchmark for the place where one exists.

Visa sponsorship is not mentioned. Applicants from outside Germany should check the official work permit route before applying.

Dev Global Jobs found this job on Arbeitnow on Nov 17, 2026.

Employer
pplwise
Location
Munich, Germany
Work mode
hybrid
Job type
Full-time
Level (from the title)
entry-level
Pay
Not stated by the employer
Found
Nov 17, 2026 on Arbeitnow
Employer text
639 words, about 3 min to read
Skills named in the advert
Linux
Before you apply
  • Apply only on the official page (arbeitnow.com). Dev Global Jobs is not the employer and never asks for a fee.
  • Mirror the skills the advert names (Linux) in your CV where you really have them; applicant tracking systems look for these words.
  • Read the employer’s full text below (about 3 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 17, 2026
Pay benchmark
Average wage, Germany
EUR 54,840 average / year

Source: OECD Average annual wages, 2025

Cost of living · Munich
87 vs New York = 100

UN living-cost index for Munich (ICSC post adjustment 52.7), as of 1 Nov 2026.

Source: ICSC post adjustment classifications (icsc.un.org)

Work permit route
  • EU Blue Card: Recognised degree and a job offer above the salary threshold
  • Skilled worker visa (Fachkräfte): Recognised qualification and a job offer
  • Opportunity Card (Chancenkarte): Points-based job search for up to one year

Official routes: Make it in Germany (Federal Government portal)

Job description

About the role

Full text from the employer, as published on Arbeitnow, arranged into sections. Nothing added or removed.

About pplwise pplwise is a recruiting consultancy for fast-growing technology companies across Europe. Through Recruiting as a Service and Executive Search, we fill key roles for our clients, from start-ups to publicly listed companies. We are filling this position for our client Filics.

About our client: Filics Filics is reinventing intralogistics with autonomous mobile robots (AMRs) that change how material moves. Its double-runner system makes Filics the first and only AMR that can drive through load carriers such as Euro pallets. This breaks with forklift logic and sets a new standard for efficiency. Filics is a small, hands-on team that solves hard problems with engineering excellence. Leadership goes to those who take initiative and consistently deliver. As Electrical Engineer (m/f/d) at Filics, you will design the electronics at the core of the next generation of robots.

About the role This is an on-site/hybrid role in Munich, close to engineering and assembly.

Filics doesn’t just use off-the-shelf components. It builds its own custom IP. The robots run on advanced boards that cover a wide range of electrical engineering. On one end is high power, such as battery and motor controllers. On the other end are high-speed interfaces like PCIe, USB and MIPI CSI. The real challenge is making all these subsystems work together as one system. Many of these problems have no textbook solution. Solving them takes solid experience, a deep understanding of the physics and a creative mind.

The EE team is small, and the robot is far from finished. You’ll own your boards end to end: requirements, system design, schematic, layout, design review, sourcing, manufacturing, testing and validation. You’ll keep owning them for as long as they’re in production. You’ll work closely with Embedded Software, Mechanical Engineering, Software and the Production team. As Filics moves from prototypes to series production, your designs need to work reliably at scale, not just in the lab.

01What you’ll do

  • Take full ownership of a complex PCB project and get it running in as few revisions as possible

  • Design high-power and high-speed circuits and make sure they work together at system level

  • Design for EMC, manufacturability and testability, and take boards through EMC testing and certification

  • Bring new technical approaches to the team, for example a new converter architecture that enables higher charging power in a smaller package

  • Introduce useful processes from your experience, such as simulation workflows that validate a layout before it goes to production

  • Help with board bring-up and debugging together with Embedded Software, and support Production with clear documentation and training

  • Take over ownership of existing boards so the team shares responsibility

02About you

  • Several years designing electronics in an R&D environment at a smaller hardware company driven by innovation (e.g. robotics, e-mobility, aviation, autonomous vehicles, motion control)

  • A proven record of taking PCBs within a larger system from requirements to a validated product

  • Strong skills in schematic design and PCB layout (Altium, KiCad, OrCAD or similar)

  • Hands-on debugging experience with an oscilloscope, logic analyzer, VNA or spectrum analyzer, plus soldering

  • Experience with designs that went through EMC testing or CE certification

  • An innovator’s mindset: you have built something new or significantly improved an existing concept

  • Basic simulation know-how (e.g. LTspice, ANSYS, thermal/EM/tolerance analysis); deeper experience is a strong plus

  • Basic experience with Linux and embedded software

  • You work independently, take ownership and thrive without rigid structures

03What Filics offers

  • Real ownership of your designs, from first draft to series production

  • Space to innovate and a wide range of technical challenges, from power electronics to high-speed design

  • A small, high-caliber team with close collaboration across disciplines

  • Fast growth: one year at Filics teaches you what usually takes many years at a large company

  • An on-site/hybrid role in Munich, close to Engineering and Assembly

Sound like you? Apply with your CV.

Find Jobs in Germany on Arbeitnow

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗