Dev Global Jobs
Government · Business

POWERED SUPPORT SYSTEMS MECHANIC

Headquarters, Air Force Reserve CommandMcConnell AFB, Kansas, United StatesFull-time$69,205 - $80,809 per yearPosted Nov 18, 2026Closes Nov 24, 2026

This listing is for a POWERED SUPPORT SYSTEMS MECHANIC role at Headquarters, Air Force Reserve Command, in McConnell AFB, Kansas, United States. The listing describes it as a full-time position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

This listing is for a POWERED SUPPORT SYSTEMS MECHANIC role at Headquarters, Air Force Reserve Command, in McConnell AFB, Kansas, United States. The listing describes it as a full-time position.

Pay stated in the listing: $69,205 - $80,809 per year.

Visa sponsorship is not mentioned. Applicants from outside United States should check the official work permit route before applying.

Dev Global Jobs found this job on USAJobs on Nov 18, 2026; applications close on Nov 24, 2026.

Employer
Headquarters, Air Force Reserve Command
Location
McConnell AFB, Kansas, United States
Job type
Full-time
Pay
$69,205 - $80,809 per year
Found
Nov 18, 2026 on USAJobs
Closes
Nov 24, 2026
Employer text
922 words, about 4 min to read
Before you apply
  • Apply only on the official page (usajobs.gov). Dev Global Jobs is not the employer and never asks for a fee.
  • Plan to apply before Nov 24, 2026.
  • Read the employer’s full text below (about 4 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 17, 2026
Pay benchmark
Average wage, United States
$86,977 average / year

This job's listed pay is 14% below the benchmark.

This job: $69,205 to 80,809

Source: OECD Average annual wages, 2025

Work permit route
  • H-1B specialty occupation: Employer petition, bachelor's degree or higher in the specialty; annual cap and lottery
  • L-1 intracompany transferee: Employees of a related company abroad transferring to a US office
  • O-1 extraordinary ability: Evidence of extraordinary ability in sciences, arts, education, business or athletics

Official routes: USCIS

Job description

About the role

Full text from the employer, as published on USAJobs, arranged into sections. Nothing added or removed.

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C for WG-5300 Industrial Equipment Maintenance Family QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-5300 Industrial Equipment Maintenance Family.

Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.

The screen out element for this position is the ability to perform the work of an POWERED SUPPORT SYSTEMS MECHANIC with little to no supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1.

Knowledge of principles of electricity (AC/DC), solid state circuitry, and safety rules and regulations pertaining to powered support systems, knowledge of the theory and operation of internal combustion diesel and gasoline engines, knowledge of the operation of emergency generator power systems, knowledge of regulations, procedures, and policies related to records maintenance and documentation, knowledge of safety and security requirements as outlined in applicable standards, regulations and policy statements, knowledge of equipment placement around aircraft, radio discipline and flight-line driving procedures.

2.

Skill in reading, interpreting, and using wiring diagrams, schematic drawings, technical orders, technical publications, and similar guides, skill in using hand and power tools, instruments, test equipment, and electrical meters to include special tools such as hydraulic knock-out tools, hammers, drills, valve spring compressors, and micrometers, skill in installing, operating, inspecting, maintaining, repairing, and modifying generators, automatic transfers witches, and uninterruptible power systems; and in maintaining, overhauling, repairing, and reconditioning internal combustion engines, both diesel and gasoline, skill in troubleshooting complex situations related to electrical power generators.

  1. Ability to apply shop procedures, policies, written and oral instructions, and directives sufficient to provide training to others, ability to repair jacks, ladders, platforms, trailers, stands and other non-powered equipment. 4. Knowledge of tool, equipment, and materials accounting and security. 5. Knowledge of USAF Technical Order Program and its procedures. 6. Ability to clean work area and/or job site upon completion of work. CONDITIONS OF EMPLOYMENT CONT'D: 1.

This is an Air Reserve Technician (ART) position. The incumbent is required to meet and maintain Air Force Reserve requirements. Work schedule will be aligned to allow incumbent to fully participate in unit training assemblies (UTA). The incumbent's regular assignments are ART duties; however, the incumbent may be assigned some non-ART duties, generally not to exceed 30 percent of total responsibilities. 2. This is a testing designated position (TDP). The employee is subject to random drug testing.

ENVIRONMENTAL FACTORS: May work inside or outside. Inside work involves frequent exposure to drafts, changing temperature, and loud noise. Outside work may involve exposure to bad weather, rain or snow, or wet or icy conditions. Both inside and outside, frequently exposed to irritation or discomfort from dust, heat, fumes, and hard damp floors or surfaces. May work on parts and systems which are dirty and greasy, and which may be dangerous to operate or repair because of defects.

Incumbent is frequently exposed to the possibility of receiving cuts, burns, bruises, strains, and electrical shock while repairing, positioning, adjusting, and moving equipment, and is exposed to the possibility of receiving burns and skin irritations from acids, fluids, and lubricants.

To reduce the dangers and irritations from the above conditions, the incumbent must follow numerous safety procedures and wear equipment such as protective eyeglasses, ear devices, hard hats, hard-toe shoes, respirators, gloves, and clothing. Some of these safety items may be uncomfortable to wear or use and may be worn or used for long periods. FUNCTIONAL REQUIREMENTS: Performs work which involves frequent bending, reaching, crouching, standing, and arm movement.

Sometimes must work in awkward positions or cramped areas. Must frequently lift and carry items weighing up to about 40pounds and lift heavier items using jacks, hoists, or helpers.??????? PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social).

Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.

The primary purpose of this position is: to serve as an Air Reserve Technician (ART) journeyman mechanic that troubleshoots, tests, repairs, modifies, overhauls, services, and dispatches powered ground support equipment and to train reservists in the accomplishment of tasks set forth herein. DUTY 1: Performs preventive maintenance on ground power support systems. DUTY 2: Performs major maintenance on ground support equipment such as power sources, major components, support components, and associated components.

DUTY 3: Performs periodic routine and special inspections of all scheduled equipment. DUTY 4: Maintains records and documents actions. DUTY 5: Utilizes safety practices and procedures and complies with following established security and safety rules and regulations and maintains a safe and clean work environment. DUTY 6: Maintains and controls tools.

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗