Dev Global Jobs
Government · Technology

SUPERVISORY CIVIL ENGINEER (GEOTECHNICAL)

U.S. Army Corps of EngineersSeattle, Washington, United StatesFull-time$133,359 - $160,638 per yearPosted Nov 18, 2026Closes Dec 2, 2026

U.S. Army Corps of Engineers is hiring for the position of SUPERVISORY CIVIL ENGINEER (GEOTECHNICAL) in Seattle, Washington, United States. The listing describes it as a full-time position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

U.S. Army Corps of Engineers is hiring for the position of SUPERVISORY CIVIL ENGINEER (GEOTECHNICAL) in Seattle, Washington, United States. The listing describes it as a full-time position.

From the advert, the main requirements are 1+ years of experience.

The advert names curriculum as a skill for this role.

Pay stated in the listing: $133,359 - $160,638 per year.

Visa sponsorship is not mentioned. Applicants from outside United States should check the official work permit route before applying.

Dev Global Jobs found this job on USAJobs on Nov 18, 2026; applications close on Dec 2, 2026.

Employer
U.S. Army Corps of Engineers
Location
Seattle, Washington, United States
Job type
Full-time
Pay
$133,359 - $160,638 per year
Experience asked
1+ years
Found
Nov 18, 2026 on USAJobs
Closes
Dec 2, 2026
Employer text
1,051 words, about 5 min to read
Skills named in the advert
curriculum
Before you apply
  • Apply only on the official page (usajobs.gov). Dev Global Jobs is not the employer and never asks for a fee.
  • Compare your own experience with the 1+ years the advert asks for, and show it clearly near the top of your CV.
  • Mirror the skills the advert names (curriculum) in your CV where you really have them; applicant tracking systems look for these words.
  • Plan to apply before Dec 2, 2026.
  • Read the employer’s full text below (about 5 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 19, 2026
Pay benchmark
Average wage, United States
$86,977 average / year

This job's listed pay is 69% above the benchmark.

This job: $133,359 to 160,638

Source: OECD Average annual wages, 2025

Work permit route
  • H-1B specialty occupation: Employer petition, bachelor's degree or higher in the specialty; annual cap and lottery
  • L-1 intracompany transferee: Employees of a related company abroad transferring to a US office
  • O-1 extraordinary ability: Evidence of extraordinary ability in sciences, arts, education, business or athletics

Official routes: USCIS

Job description

About the role

Full text from the employer, as published on USAJobs, arranged into sections. Nothing added or removed.

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

Current Department of Army Civilian Employees Current Department of Defense (DOD) Civilian Employee (non-Army) Interagency Career Transition Assistance Plan Land Management Workforce Flexibility Act Military Spouses, under Executive Order (E.O.) 13473 Non-Department of Defense (DoD) Transfer Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, DoD Retained Grade Preference Eligible Veterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application.

Additional information about transcripts is in this document. SELECTIVE PLACEMENT FACTOR: This position requires a current Professional Engineering License issued by any State in the United States, the District of Columbia, Guam, or Puerto Rico. (You must upload a copy of your current PE license within your application package) Basic Requirement for CIVIL ENGINEER (GEOTECHNICAL): A. Degree: Bachelor's degree (or higher degree) in engineering.

To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1.

Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2.

Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above.

The courses must be fully acceptable toward meeting the requirements of an engineering program. 4.

Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes: 1) performing geotechnical design for Civil works, Military or Hazardous, Toxic, and Radioactive Waste (HTRW) projects; 2) conducting geotechnical investigations using standard geotechnical testing procedures to include writing geotechnical design reports; AND 3) presenting civil or geotechnical-related information at meetings, conferences and/or briefings to senior management.

This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).

Responsible for the management and supervision of professional staff providing highly complex soils engineering work for civil, military and HTRW projects.,Provides technical expertise and advice to the Chief, Design Branch on extremely complex soils engineering issues.,Forecasts resource requirements and resolves conflicts relating to resource constraints.,Participates in conferences and discussion with Division in the presentation of technical requirements, and in planning, development and design of soil/geotechnical features of projects.,Ensures adequate guidance, support and mentoring of subordinate staff on technical matters such as codes and criteria compliance, selection of design solutions, safety, and costs of end products, etc.,Provides technical oversight of A-E’s who are used to perform design and geotechnical investigative work.,Reviews designs and working drawings prepared by A-E’s to ensure conformance with objectives, approved standards, special directives and existing laws and regulations.

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗