Dev Global Jobs
Technology

CNC Engineer, GROB / Mazak

Metallfabriken Ljunghäll AktiebolagVimmerby, SwedenFull-timeSalary not listed · Typical pay in SwedenPosted Nov 18, 2026Closes Dec 31, 2026

Metallfabriken Ljunghäll Aktiebolag is hiring for the position of CNC Engineer, GROB / Mazak in Vimmerby, Sweden. The listing describes it as a full-time position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

Metallfabriken Ljunghäll Aktiebolag is hiring for the position of CNC Engineer, GROB / Mazak in Vimmerby, Sweden. The listing describes it as a full-time position.

The employer does not state a salary in this listing; DGJ Insight below shows an official pay benchmark for the place where one exists.

Visa sponsorship is not mentioned. Applicants from outside Sweden should check the official work permit route before applying.

Dev Global Jobs found this job on Arbetsförmedlingen (JobTech) on Nov 18, 2026; applications close on Dec 31, 2026; the apply link was last checked on Nov 21, 2026.

Employer
Metallfabriken Ljunghäll Aktiebolag
Location
Vimmerby, Sweden
Job type
Full-time
Pay
Not stated by the employer
Found
Nov 18, 2026 on Arbetsförmedlingen (JobTech)
Closes
Dec 31, 2026
Employer text
688 words, about 3 min to read
Before you apply
  • Apply only on the official page (apply.workspacerecruit.com). Dev Global Jobs is not the employer and never asks for a fee.
  • Plan to apply before Dec 31, 2026.
  • Read the employer’s full text below (about 3 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 22, 2026
Pay benchmark
Average wage, Sweden
SEK 546,171 average / year

Source: OECD Average annual wages, 2025

Cost of living · Sweden
78.4 vs New York = 100

UN living-cost index for Sweden (ICSC post adjustment 37.6), as of 1 Nov 2026.

Source: ICSC post adjustment classifications (icsc.un.org)

Work permit route
  • Work permit: Job offer with terms equal to Swedish collective agreements; new salary threshold
  • EU Blue Card: Degree and salary threshold
  • Job seeker permit for highly qualified: Advanced degree, up to 9 months

Official routes: Swedish Migration Agency

Freshness
Apply link answered

Answered at our last check on Nov 21, 2026.

Closes on Dec 31, 2026.

Job description

About the role

Full text from the employer, as published on Arbetsförmedlingen (JobTech), arranged into sections. Nothing added or removed.

We are looking for an experienced and hands-on CNC Engineer with strong technical troubleshooting skills and practical experience working with GROB and/or Mazak CNC machines. In this role, you will work directly with our CNC equipment at our Södra Vi facility, troubleshooting complex technical problems involving control systems, electrical systems and mechanical components. You do not need experience with both GROB and Mazak. Strong experience with either GROB or Mazak CNC machines is required. An important part of the role is also knowledge transfer and competence development. You will use your CNC expertise to support and train our shift-based Mechanics, Electricians and Automation Electricians, helping us build stronger technical capabilities within the organization. We are looking for someone who understands CNC machines in depth and wants to find the root cause of technical problems, not simply get the machine running again.

01Your main responsibilities

  • Troubleshooting and fault finding on GROB and/or Mazak CNC machines

  • Troubleshooting of CNC control systems

  • Mechanical troubleshooting, repairs and adjustments

  • Electrical troubleshooting and fault finding

  • Diagnosing machine alarms and technical failures

  • Reading and understanding electrical and mechanical drawings

  • Troubleshooting sensors, drives, motors and machine components

  • Supporting preventive and corrective maintenance

  • Identifying and eliminating root causes of recurring machine problems

  • Working closely with Automation, Maintenance, Engineering and Production to improve machine reliability and availability

  • Training and developing our shift-based Mechanics, Electricians and Automation Electricians in CNC troubleshooting, diagnostics and systematic problem solving

  • Sharing technical knowledge and building stronger in-house competence around GROB and Mazak CNC equipment

  • Supporting the development of structured troubleshooting methods and technical standards

02Your background

We are looking for someone with:

  • Practical experience working with GROB or Mazak CNC machines

  • Strong CNC machine troubleshooting experience

  • Good understanding of CNC control systems

  • Strong mechanical knowledge and troubleshooting skills

  • Experience with electrical troubleshooting

  • Ability to read electrical and mechanical drawings

  • Good general PC and IT skills

  • Experience from an industrial production environment

  • A systematic and practical approach to problem solving

  • The ability and willingness to train, support and develop other technicians

Experience with one of the two machine brands is sufficient. Experience with both GROB and Mazak is an advantage. It is an advantage if you also have experience with

  • Advanced diagnostics and parameter settings in CNC control systems

  • Servo drives, motors, sensors and measurement systems

  • Spindle, axis and positioning problems

  • Machine geometry and alignment

  • Preventive and predictive maintenance

  • Automation and equipment connected to CNC machining lines

  • CNC machine optimization and continuous improvement

  • Developing technical training or troubleshooting standards

03Who are you?

You are a hands-on engineer who enjoys solving difficult technical problems and working close to the equipment. When a machine stops, you want to understand why it stopped, not just reset the alarm and restart it. You work systematically, take responsibility and enjoy collaborating with Production, Maintenance, Engineering and Automation. You also enjoy sharing your knowledge with others. You can explain technical problems, diagnostics and troubleshooting methods in a practical and understandable way. You are positive, curious and open to new digital tools, diagnostic methods and technologies that can make troubleshooting faster and more effective. International candidates

We welcome applications from both Sweden and internationally. If you are currently working with GROB or Mazak CNC equipment outside Sweden and are interested in relocating to Södra Vi (Vimmerby), Sweden, we encourage you to apply. For the right candidate, we are open to discussing relocation to Sweden. If you have any questions about the role please contact .

Why join us?

You will work at our Södra Vi facility in a highly automated industrial environment where CNC machining is a critical part of our production. As a CNC Engineer, you will have an important role not only in improving machine reliability and reducing downtime, but also in developing the technical competence of our organization. Your expertise will help us strengthen our internal ability to troubleshoot and solve increasingly complex CNC-related problems. We are looking for someone who wants to bring strong CNC expertise into the organization, share that knowledge with others and help us continuously improve the way we work. Interested? We look forward to hearing from you.

Location: Södra Vi (Vimmerby), Sweden

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗