Technical Pre-sales Solution Engineer (f/m/d)
Neuverge Tron is hiring for the position of Technical Pre-sales Solution Engineer (f/m/d) in Munich, Germany. The listing describes it as a full-time position with hybrid working.
DGJ summary of this job
Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.
Neuverge Tron is hiring for the position of Technical Pre-sales Solution Engineer (f/m/d) in Munich, Germany. The listing describes it as a full-time position with hybrid working.
From the advert, the main requirements are 3 to 5 years of experience and English language skills.
The advert names cybersecurity as a skill for this role.
The employer does not state a salary in this listing; DGJ Insight below shows an official pay benchmark for the place where one exists.
Visa sponsorship is not mentioned. Applicants from outside Germany should check the official work permit route before applying.
Dev Global Jobs found this job on Arbeitnow on Nov 19, 2026.
- Employer
- Neuverge Tron
- Location
- Munich, Germany
- Work mode
- hybrid
- Job type
- Full-time
- Pay
- Not stated by the employer
- Experience asked
- 3 to 5 years
- Languages asked
- English
- Found
- Nov 19, 2026 on Arbeitnow
- Employer text
- 674 words, about 3 min to read
- Apply only on the official page (arbeitnow.com). Dev Global Jobs is not the employer and never asks for a fee.
- Compare your own experience with the 3 to 5 years the advert asks for, and show it clearly near the top of your CV.
- Mirror the skills the advert names (cybersecurity) in your CV where you really have them; applicant tracking systems look for these words.
- Say your level in English plainly (for example B2 or C1).
- Read the employer’s full text below (about 3 min) before you apply.
- Build or check your CV with the free DGJ CV Builder.
DGJ Insight
Our own data about this role and place, from official statistics and our live job index.
Source: OECD Average annual wages, 2025
UN living-cost index for Munich (ICSC post adjustment 52.7), as of 1 Nov 2026.
Source: ICSC post adjustment classifications (icsc.un.org)
- EU Blue Card: Recognised degree and a job offer above the salary threshold
- Skilled worker visa (Fachkräfte): Recognised qualification and a job offer
- Opportunity Card (Chancenkarte): Points-based job search for up to one year
Official routes: Make it in Germany (Federal Government portal)
About the role
Full text from the employer, as published on Arbeitnow, arranged into sections. Nothing added or removed.
As a Technical Pre-sales Solution Engineer (EMS, PPC & SCADA) at NeuVerge-Tron GmbH, you will serve as the technical lead and solution architect during pre-sales and tender phases for utility-scale renewable energy and energy storage power plants.
In this position, your core product portfolio comprises Energy Management Systems (EMS), Power Plant Controllers (PPC), and SCADA platforms. You will analyze customer requirements, regional Grid Codes, and Transmission/Distribution System Operator (TSO/DSO) mandates, translating them into resilient, high-availability, and cybersecure system architectures.
(Note: This role focuses on control software, industrial automation, and OT system architecture; it does not cover battery cell sizing, containerized mechanical design, or civil EPC scope.)
Key Responsibilities01Technical Pre-sales & Bid Management
Analyze customer technical specifications, RFIs, RFQs, and RFPs for utility-scale solar, wind, and hybrid BESS assets.
Author technical proposals, functional architecture diagrams, and Statements of Work (SOW) for EMS/SCADA solutions.
Compile compliance matrices and deviation lists addressing customer specifications and utility regulations.
Define the Bill of Materials (BOM), covering server hardware, industrial controllers, networking equipment, software licenses, and engineering services.
Lead technical deep-dive workshops, solution demonstrations, and clarification sessions with customers, EPC contractors, and grid operators.
02Grid Code Compliance & Functional Control Design
Evaluate regional Grid Code regulations across target European markets (e.g., VDE-AR-N 4110/4120, ENTSO-E standards) and translate them into EMS/PPC control requirements
Architect plant-level control logic, including Active Power Control, Reactive Power/Power Factor Regulation, POI/PCC Voltage Support, Frequency Response, and Ramp Rate restrictions.
Define EMS-level operational strategies, such as automated dispatch tracking, State of Charge (SoC) management constraints, energy arbitrage scheduling, ancillary service controls, and fail-safe/black-start logics.
03System Integration & Communication Architecture
Design overall system architectures connecting EMS, PPC, SCADA, Historian, and Human-Machine Interfaces (HMI).
Define interface specifications for external subsystems: Battery Management Systems (BMS), Power Conversion Systems (PCS), MV switchgear, digital protection relays, power meters, and TSO/DSO dispatch centers.
Develop and maintain interface control documents (ICD), data point lists, and signal mapping registers.
Implement and validate standard industrial protocols, including Modbus TCP/RTU, IEC 60870-5-104, IEC 61850 (MMS/GOOSE), DNP3, and OPC UA.
Architect high-availability schemes, redundancy topologies, automated failover mechanisms, time synchronization (NTP/PTP), and disaster recovery plans.
04OT Networking & Cybersecurity Architecture
Design Operational Technology (OT) network topologies, VLAN segmentations, IP addressing schemes, and DMZ firewall policies.
Formulate secure remote maintenance topologies, jump host concepts, VPN tunnels, and Role-Based Access Control (RBAC) mechanisms.
Ensure EMS solution adherence to cybersecurity standards, including IEC 62443 and IEC 62351 frameworks.
Collaborate with customer IT/OT security teams and external auditors during security reviews and threat modeling assessments.
05Verification & Handover
Define verification scopes and technical criteria for Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and grid compliance commissioning.
Support engineering, commissioning, and project management teams during post-award handover to ensure seamless project delivery.
06Scope Boundaries
To preserve focus on control systems and software integration, this position explicitly excludes:
Battery cell/module selection, chemistry evaluation, and electrochemical degradation modeling.
Mechanical layout, thermal HVAC design, or fire suppression engineering of BESS containers.
Primary high/medium voltage electrical hardware engineering (transformers, switchgear internals, or EPC civil infrastructure).
07Education
Bachelor’s or Master’s degree in Electrical Engineering, Automation, Power Systems, Computer Engineering, or a related engineering discipline.
08Professional Experience
3 to 5+ years of experience in technical presales, solution architecture, or systems engineering focusing on EMS, PPC, or SCADA in power generation or grid utilities.
Practical familiarity with grid integration procedures and technical dialogue with European grid operators (TSOs/DSOs).
09Technical & Protocol Competencies
Solid understanding of power utility communication standards: IEC 60870-5-104, IEC 61850, Modbus TCP/RTU, DNP3, and OPC UA.
Hands-on experience with industrial automation platforms (PLCs/RTUs), real-time historians, and SCADA packages.
Working knowledge of industrial cybersecurity best practices (IEC 62443 / IEC 62351).
10Key Competencies
Strong analytical capability to dissect technical tender documents into structured requirements.
Confident presentation skills in customer-facing technical exchanges and contract negotiations.
11Language Skills
Professional fluency in English (written and verbal) is required.
German language or any other third EU or Chinese proficiency are strongly preferred.
Find more English Speaking Jobs in Germany on Arbeitnow
Ask CSI about this job
Answers link to jobs and tools on Dev Global Jobs.
Review Dev Global Jobs
Used this site to find a job? Tell other job seekers what worked and what did not.