Dev Global Jobs
Government · Technology

ELECTRICAL ENGINEER

Air National GuardMinot, North Dakota, United StatesFull-time$127,295 - $165,486 per yearPosted Nov 19, 2026Closes Dec 3, 2026

Air National Guard has an opening for an ELECTRICAL ENGINEER in Minot, North Dakota, United States. It is listed as a full-time position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

Air National Guard has an opening for an ELECTRICAL ENGINEER in Minot, North Dakota, United States. It is listed as a full-time position.

Reading the advert, the employer asks for 1+ years of experience.

Skills and tools named in the text include budgeting and curriculum.

The listing gives the pay as $127,295 - $165,486 per year.

The advert does not mention visa sponsorship. If you would move to United States for this job, check the official work permit route first (DGJ Insight lists it where we have it).

Dev Global Jobs found this job on USAJobs on Nov 19, 2026; applications close on Dec 3, 2026.

Employer
Air National Guard
Location
Minot, North Dakota, United States
Job type
Full-time
Pay
$127,295 - $165,486 per year
Experience asked
1+ years
Found
Nov 19, 2026 on USAJobs
Closes
Dec 3, 2026
Employer text
1,121 words, about 5 min to read
Skills named in the advert
budgetingcurriculum
Before you apply
  • Apply only on the official page (usajobs.gov). Dev Global Jobs is not the employer and never asks for a fee.
  • Compare your own experience with the 1+ years the advert asks for, and show it clearly near the top of your CV.
  • Mirror the skills the advert names (budgeting and curriculum) in your CV where you really have them; applicant tracking systems look for these words.
  • Plan to apply before Dec 3, 2026.
  • Read the employer’s full text below (about 5 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 19, 2026
Pay benchmark
Average wage, United States
$86,977 average / year

This job's listed pay is 68% above the benchmark.

This job: $127,295 to 165,486

Source: OECD Average annual wages, 2025

Work permit route
  • H-1B specialty occupation: Employer petition, bachelor's degree or higher in the specialty; annual cap and lottery
  • L-1 intracompany transferee: Employees of a related company abroad transferring to a US office
  • O-1 extraordinary ability: Evidence of extraordinary ability in sciences, arts, education, business or athletics

Official routes: USCIS

Job description

About the role

Full text from the employer, as published on USAJobs, arranged into sections. Nothing added or removed.

In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions. BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: Degree: Engineering.

To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following: - Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT) , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration.

For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. - Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. - Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph 1.

The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph 1. - Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) NOTE: You must submit a copy of your transcripts with your application.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-12, or equivalent in other pay systems.

Examples of specialized experience includes knowledge and skill of a professional electrical engineer, so as to be able to serve as an expert to resolve complicated and critical facilities engineering problems/issues, and plan, design, monitor and evaluate comprehensive electrical and electronic engineering programs and projects.

Experience of engineering maintenance concepts, theories, principles, practices, and techniques for computerized maintenance management systems and ability to serve as project manager for the ANG. Experience of other related engineering disciplines. Ability to apply new technologies to solve unusual and controversial problems of a decisive nature.

Ability to make critical analyses and evaluations of the ramifications, advisability, and impact of large engineering projects so as to assure compliance with applicable objectives, standards and requirements. FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-12 level is required to meet the time-in-grade requirements for the GS-13 level.

TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1.

Professional knowledge of electrical engineering concepts, principles, and practices and extensive familiarity with other engineering disciplines and architecture; a broad range of engineering and construction standards, methods, practices, and techniques, materials, and equipment to ensure work is in compliance with regulations and standards; and the operations, products, services, needs, and goals of O&M programs and assigned organizations and related customers, functions, and resources. 2.

Knowledge of standard contracting regulations, practices, and procedures; and work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non appropriated funds. 3. Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions. 4. Knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders. 5.

Knowledge of program planning and budgeting cycles, financial control and budget systems, and management; and of environmental principles, practices, procedures, laws, regulations, and current legislative issues.6.

Ability to plan, conduct, and record site/facility surveys and inspections; research, analyze, interpret, and apply rules, regulations, and procedures to a variety of situations and to recommend timely and economical solutions; plan and organize work and coordinate with other engineering disciplines and architects; and to communicate effectively both orally and in writing and maintain good working relations.

Serves as a command technical consultant/representative to installations, headquarters and professional committees concerning facilities planning, design, construction, renovation and maintenance projects, including utility systems, utilizing a professional knowledge of electrical engineering. Performs planning, reviewing and/or design. work for substantial new construction, renovation and improvement projects for a variety of real property facilities throughout the ANG command.

Evaluates command programs and development plans for construction, renovation and improvements or real property facilities for ANG Installations or complexes at diverse locations, utilizing a professional knowledge of electrical engineering. Coordinates projects with engineers in other disciplines or with architects. Keeps abreast of emerging technologies to ensure programmed development will not prematurely become obsolete.

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗