Dev Global Jobs
Government · Technology

General Engineer (Lead)

Federal Aviation AdministrationEl Segundo, California, United StatesFull-time$130,314 - $202,026 per yearPosted Nov 19, 2026Closes Nov 30, 2026

Federal Aviation Administration has an opening for a General Engineer (Lead) in El Segundo, California, United States. It is listed as a full-time, senior position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

Federal Aviation Administration has an opening for a General Engineer (Lead) in El Segundo, California, United States. It is listed as a full-time, senior position.

Reading the advert, the employer asks for 1+ years of experience.

The advert names curriculum as a skill for this role.

The listing gives the pay as $130,314 - $202,026 per year.

The advert does not mention visa sponsorship. If you would move to United States for this job, check the official work permit route first (DGJ Insight lists it where we have it).

Dev Global Jobs found this job on USAJobs on Nov 19, 2026; applications close on Nov 30, 2026.

Employer
Federal Aviation Administration
Location
El Segundo, California, United States
Job type
Full-time
Level (from the title)
senior
Pay
$130,314 - $202,026 per year
Experience asked
1+ years
Found
Nov 19, 2026 on USAJobs
Closes
Nov 30, 2026
Employer text
915 words, about 4 min to read
Skills named in the advert
curriculum
Before you apply
  • Apply only on the official page (usajobs.gov). Dev Global Jobs is not the employer and never asks for a fee.
  • Compare your own experience with the 1+ years the advert asks for, and show it clearly near the top of your CV.
  • Mirror the skills the advert names (curriculum) in your CV where you really have them; applicant tracking systems look for these words.
  • Plan to apply before Nov 30, 2026.
  • Read the employer’s full text below (about 4 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 19, 2026
Pay benchmark
Average wage, United States
$86,977 average / year

This job's listed pay is 91% above the benchmark.

This job: $130,314 to 202,026

Source: OECD Average annual wages, 2025

Work permit route
  • H-1B specialty occupation: Employer petition, bachelor's degree or higher in the specialty; annual cap and lottery
  • L-1 intracompany transferee: Employees of a related company abroad transferring to a US office
  • O-1 extraordinary ability: Evidence of extraordinary ability in sciences, arts, education, business or athletics

Official routes: USCIS

Job description

About the role

Full text from the employer, as published on USAJobs, arranged into sections. Nothing added or removed.

01Basic Requirements

Degree: Professional Engineering.

To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1.

Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2.

Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements section above.

The courses must be fully acceptable toward meeting the requirements of an engineering program as described above. 4.

Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor¿s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) To qualify for this position, you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-I (FG/GS-13).

Specialized experience is experience gained in an 800 Engineer series position that has equipped you with the particular knowledge, skills, and abilities to successfully perform the duties of the position. Specialized experience is: Experience in the planning, coordinating, identifying resources, scheduling, and tracking of multi-site engineering projects through completion. Qualification requirements must be met by the closing date of this vacancy announcement.

For additional information on qualification requirements, please visit the Office of Personnel Management (OPM) website at: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/

The incumbent applies experience and comprehensive knowledge of engineering principles, theories, and concepts applicable to incumbent's discipline, as well as an understanding of new technologies and methodologies, to solve complex problems and to develop improved technical processes for the organization. Assignments typically involves engineer to have knowledge of NAS Facilities, Facilities and Equipment Programs, and FAA organizations.

Represents assigned Center on matter requiring technical interpretation and guidance, as the senior technical point of contact. Serves as the senior engineering for assigned projects/programs to all stakeholders including management, other employees and external parties. Plans, coordinates and reviews engineering work of the installation actives. Prioritizes and outlines work. Provides advice to solve technical problems. Reviews work of other engineers for technical accuracy and adequacy.

Assists Center personnel with resolving all, but unique, engineering problems and may create new solutions and policy interpretations, as the situation requires. Provides constructive feedback and persuasion on project/program matters using effective interpersonal skills and abilities. Organizes, coordinates and mentors the efforts of project engineers supporting the program.

Leads the development of standardized implementation plans, processes templates, and activities within assigned Engineering Center and/or program area. Works as a team with other Leads to deliver a consistent and efficient implementation produce across each Service Area. Serves as the focal for gathering and integrating feedback into downstream sites and coordinating feedback with other Leads in the Service Area. Maintains consistency with applicable standards, procedures, and implementation methodologies.

  • Ensures project/program schedules are compatible with organizational objectives, support project/program needs; and can be accomplished within available resources and funding.
  • Oversees and monitors project interdependencies by assessing the impacts to project/programs due to new requirements, technologies, budget constraints, or changes.
  • Plans, coordinates, identifies resources, schedules, and tracks large-scale and/or multi-site engineering projects through completion.

Prepares cost estimates and risk management reports for work at the assigned area of responsibility. The work is reviewed rarely, typically though status reports and at project completion, to ensure technical compliance and alignment with the requirements of the project or other work activity.

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗