Dev Global Jobs
Creative

Senior Mechanical Designer

CDDS AGZürich, SwitzerlandFull-timeSalary not listed · Typical pay in SwitzerlandPosted Nov 19, 2026

CDDS AG has an opening for a Senior Mechanical Designer in Zürich, Switzerland. The listing describes it as a full-time, senior position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

CDDS AG has an opening for a Senior Mechanical Designer in Zürich, Switzerland. The listing describes it as a full-time, senior position.

From the advert, the main requirements are 5+ years of experience.

The advert mentions SolidWorks and CAD among the skills and tools for this role.

The employer does not state a salary in this listing; DGJ Insight below shows an official pay benchmark for the place where one exists.

Visa sponsorship is not mentioned. Applicants from outside Switzerland should check the official work permit route before applying.

Dev Global Jobs found this job on Arbeitnow on Nov 19, 2026.

Employer
CDDS AG
Location
Zürich, Switzerland
Job type
Full-time
Level (from the title)
senior
Pay
Not stated by the employer
Experience asked
5+ years
Found
Nov 19, 2026 on Arbeitnow
Employer text
573 words, about 3 min to read
Skills named in the advert
SolidWorksCAD
Before you apply
  • Apply only on the official page (arbeitnow.ch). Dev Global Jobs is not the employer and never asks for a fee.
  • Compare your own experience with the 5+ years the advert asks for, and show it clearly near the top of your CV.
  • Mirror the skills the advert names (SolidWorks and CAD) in your CV where you really have them; applicant tracking systems look for these words.
  • Read the employer’s full text below (about 3 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 20, 2026
Pay benchmark
Average wage, Switzerland
CHF 98,334 average / year

Source: OECD Average annual wages, 2025

Cost of living · Geneva
102.6 vs New York = 100

UN living-cost index for Geneva (ICSC post adjustment 80.1), as of 1 Nov 2026.

Source: ICSC post adjustment classifications (icsc.un.org)

Work permit route
  • Work permit B / L (non-EU quota): Highly qualified specialists, employer proves no Swiss or EU candidate; annual quotas
  • EU/EFTA free movement permits: Registration for EU/EFTA nationals with a job
Job description

About the role

Full text from the employer, as published on Arbeitnow, arranged into sections. Nothing added or removed.

You want to help build Europe’s resilience? You want to protect people and critical infrastructure?

You want to take ownership of designs that move from early prototypes to reliable serial production?

Join CDDS to turn ambitious engineering concepts into parts and assemblies that can be manufactured, assembled, and delivered at scale.

CDDS specializes in developing low-collateral kinetic interceptors designed to neutralize malicious drones, including Mavics, FPV racers, and fast fixed wings. Our solutions are built for precision and safety, minimizing risk to surroundings while countering threatening unmanned aerial systems. We work at the cutting edge of counter-drone technology, delivering reliable protection for critical assets and environments.

01Your Mission

We are looking for an experienced Senior Mechanical Designer with strong expertise in injection molding and a track record of taking products from prototype to serial production.

You will work hands-on in CAD, developing and refining parts and assemblies with manufacturing and assembly requirements built into the design from the start. You will collaborate directly with injection molding suppliers, resolve manufacturability issues, and follow your designs through tooling, first samples, and production ramp-up.

Working closely with our mechanical, electrical, and production teams, you will help ensure that our designs perform in the field and can be produced and assembled consistently. We are looking for someone who have practical manufacturing knowledge and follows a design through until it works on the assembly line.

02Core Responsibilities

  • Develop and refine 3D CAD models, assemblies, and production drawings, with a strong focus on injection-molded plastic parts.

  • Take designs from functional prototypes through design release, tooling, initial production runs, and serial production.

  • Apply design for manufacturing and assembly principles to improve part quality, reduce cost, and simplify production.

  • Work directly with injection molding suppliers on feasibility reviews, tooling constraints, design changes, and first-sample evaluation.

  • Design for efficient, repeatable assembly, including accessible fastening, clear part orientation, and mistake-proofing methods such as poka-yoke.

03Your Profile

You bring practical experience turning designs into manufactured products. You understand how CAD decisions affect tooling, part consistency, assembly effort, and cost. You are comfortable discussing details with suppliers and working alongside the people who assemble your designs.

  • At least 5 years of relevant professional experience in mechanical design or product development.

  • Demonstrated experience taking at least one product or significant assembly from prototype through production ramp-up.

  • Proficiency in professional 3D CAD software and the creation of complete manufacturing drawings.

  • Strong understanding of injection molding constraints, including draft angles, wall thickness, ribs, bosses, undercuts, shrinkage, and warpage.

  • Ability to work autonomously and collaborate closely with engineering, suppliers, and production teams.

  • BSc or MSc in Mechanical Engineering, Product Development, Manufacturing Engineering, or a related field, a Swiss apprenticeship as a Konstrukteur/in EFZ, or an equivalent relevant qualification.

04Nice-to-Have

  • Proficiency in SolidWorks.

  • Experience with composite materials and their manufacturing and assembly processes.

  • Experience designing assembly fixtures, inspection aids, or production tooling.

  • Familiarity with machining, sheet metal fabrication, and additive manufacturing.

  • Experience with drones, robotics, aerospace, or other products combining mechanical and electronic systems.

05Why CDDS

  • Direct impact on a mission-critical technology shaping Europe’s security landscape.

  • Fast-moving startup environment with high ownership.

  • Work with a highly technical, ambitious, and hands-on team.

  • Real-world testing, deployments, and customer demonstrations.

  • Attractive compensation.

06Details

Location: Zürich Hardbrücke, on-site Start date: ASAP Environment: High-impact deep-tech startup working on real deployments

If you are interested in the position, please apply via the application form.

Find more English Speaking Jobs in Switzerland on Arbeitnow

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗