Dev Global Jobs
Government · Technology

General Engineer

Bureau of Industry and SecurityWashington, District of Columbia, United StatesFull-time$121,785 - $187,093 per yearPosted Nov 19, 2026Closes Nov 27, 2026

Bureau of Industry and Security is hiring for the position of General Engineer in Washington, District of Columbia, United States. The listing describes it as a full-time position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

Bureau of Industry and Security is hiring for the position of General Engineer in Washington, District of Columbia, United States. The listing describes it as a full-time position.

From the advert, the main requirements are 1+ years of experience.

The advert mentions curriculum and cybersecurity among the skills and tools for this role.

Pay stated in the listing: $121,785 - $187,093 per year.

Visa sponsorship is not mentioned. Applicants from outside United States should check the official work permit route before applying.

Dev Global Jobs found this job on USAJobs on Nov 19, 2026; applications close on Nov 27, 2026.

Employer
Bureau of Industry and Security
Location
Washington, District of Columbia, United States
Job type
Full-time
Pay
$121,785 - $187,093 per year
Experience asked
1+ years
Found
Nov 19, 2026 on USAJobs
Closes
Nov 27, 2026
Employer text
1,172 words, about 5 min to read
Skills named in the advert
curriculumcybersecurity
Before you apply
  • Apply only on the official page (usajobs.gov). Dev Global Jobs is not the employer and never asks for a fee.
  • Compare your own experience with the 1+ years the advert asks for, and show it clearly near the top of your CV.
  • Mirror the skills the advert names (curriculum and cybersecurity) in your CV where you really have them; applicant tracking systems look for these words.
  • Plan to apply before Nov 27, 2026.
  • Read the employer’s full text below (about 5 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 19, 2026
Pay benchmark
Average wage, United States
$86,977 average / year

This job's listed pay is 78% above the benchmark.

This job: $121,785 to 187,093

Source: OECD Average annual wages, 2025

Work permit route
  • H-1B specialty occupation: Employer petition, bachelor's degree or higher in the specialty; annual cap and lottery
  • L-1 intracompany transferee: Employees of a related company abroad transferring to a US office
  • O-1 extraordinary ability: Evidence of extraordinary ability in sciences, arts, education, business or athletics

Official routes: USCIS

Job description

About the role

Full text from the employer, as published on USAJobs, arranged into sections. Nothing added or removed.

Qualification requirements in the vacancy announcements are based on the U.S. Office of Personnel Management (OPM) Qualification Standards Handbook, which contains federal qualification standards.

This handbook is available on the Office of Personnel Management's website located at: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=Occupational-Series Applicants must possess one year of specialized experience equivalent in difficulty and responsibility to the next lower grade level in the Federal Service.

Specialized experience is experience that has equipped the applicant with the particular competencies/knowledge, skills and abilities to successfully perform the duties of the position. This experience need not have been in the federal government. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations e.g., professional; philanthropic, religious; spiritual; community, student, social).

Volunteer work helps build critical competencies; knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

01Basic Requirements

All applicants must meet the basic requirements listed below: A. Degree: Engineering.

To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1.

Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2.

Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A.

The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4.

Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not allinclusive.) -AND- IN ADDITION, TO MEETING THE BASIC REQUIREMENTS ABOVE APPLICANTS MUST ALSO MEET THE QUALIFICATION REQUIREMENTS LISTED BELOW: To qualify at the GS-13 level: SPECIALIZED EXPERIENCE: You must possess one full year (52 weeks) of specialized experience equivalent to the GS-12 in the Federal service.

GS-13 - Specialized experience is defined as: 1) Applying engineering experience to analyze policies associated with commodities or technologies relevant to one or more of the following areas: advanced computing; advanced engineering materials; advanced gas turbine engine technologies; advanced and network sensing and signature management; advanced manufacturing; artificial intelligence; biotechnologies; clean energy generation and storage; data privacy, data security, and cybersecurity; directed energy; highly automated, autonomous, uncrewed systems, and robotics; human-machine interfaces, hypersonics, integrated communication and network technologies, position, navigation and timing (PNT) technologies; quantum information and enabling technologies; semiconductors and microelectronics; or space technologies and systems; AND 2) Collaborating with engineers and program management personnel on projects involving multiple engineering disciplines or technologies; AND 3) Preparing technical analyses, summaries, or reports and communicating technical findings to internal or external stakeholders.

To qualify at the GS-14 level: SPECIALIZED EXPERIENCE: You must possess one full year (52 weeks) of specialized experience equivalent to the GS-13 in the Federal service.

GS-14 - Specialized experience is defined as: 1) Applying engineering experience to analyze policies associated with commodities or technologies relevant to two or more of the following areas: advanced computing; advanced engineering materials; advanced gas turbine engine technologies; advanced and network sensing and signature management; advanced manufacturing; artificial intelligence; biotechnologies; clean energy generation and storage; data privacy, data security, and cybersecurity; directed energy; highly automated, autonomous, uncrewed systems, and robotics; human-machine interfaces, hypersonics, integrated communication and network technologies, position, navigation, and timing (PNT) technologies; quantum information and enabling technologies; semiconductors and microelectronics; or space technologies and systems; AND 2) Independently leading complex engineering analyses involving multiple technologies or engineering disciplines, coordinating with stakeholders, and supporting interagency or cross-organizational efforts; AND 3) Developing technical assessments and reports and presenting findings and policy recommendations to leadership and other stakeholders NOTE: Transcripts must be submitted with the application.

Education cannot be credited without supporting documentation.

As General Engineer, you will perform the following duties: Review and process export license applications and commodity classification requests for items controlled for national security reasons. Apply engineering expertise to develop export control policies, review proposed exports, and resolve technical and policy issues. Participate in government and industry meetings to address issues involving the control of dual-use items.

  • Provide technical guidance and respond to questions from federal agencies, industry representatives, and the public on export control requirements.
  • Evaluate, review and process export license applications and commodity classification requests for items controlled for national security reasons.
  • Apply knowledge of technical information about items controlled under the Commerce Control List (CCL) and Export Administration Regulations (EAR).

Apply engineering expertise to develop export control policies, review proposed exports, and resolve technical and policy issues. This Job Opportunity Announcement may be used to fill other General Engineer GS-0801-13/14, (Full Performance Level (FPL) GS-14 positions within the Department of Commerce in the same geographical location or local commuting area with the same qualifications and specialized experience.

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗