Dev Global Jobs
Technology

RF Electronics Engineer (GNSS)

Harmattan AiLausanne, United StatesFull-timeSalary not listed · Typical pay in United StatesPosted Nov 20, 2026

Harmattan Ai has an opening for a RF Electronics Engineer (GNSS) in Lausanne, United States. It is listed as a full-time position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

Harmattan Ai has an opening for a RF Electronics Engineer (GNSS) in Lausanne, United States. It is listed as a full-time position.

No salary is given in this listing, so check the official pay figures in the DGJ Insight section below where they exist.

The advert does not mention visa sponsorship. If you would move to United States for this job, check the official work permit route first (DGJ Insight lists it where we have it).

Dev Global Jobs found this job on Arbeitnow on Nov 20, 2026.

Employer
Harmattan Ai
Location
Lausanne, United States
Job type
Full-time
Pay
Not stated by the employer
Found
Nov 20, 2026 on Arbeitnow
Employer text
508 words, about 2 min to read
Before you apply
  • Apply only on the official page (arbeitnow.ch). Dev Global Jobs is not the employer and never asks for a fee.
  • Read the employer’s full text below (about 2 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 20, 2026
Pay benchmark
Average wage, United States
$86,977 average / year

Source: OECD Average annual wages, 2025

Work permit route
  • H-1B specialty occupation: Employer petition, bachelor's degree or higher in the specialty; annual cap and lottery
  • L-1 intracompany transferee: Employees of a related company abroad transferring to a US office
  • O-1 extraordinary ability: Evidence of extraordinary ability in sciences, arts, education, business or athletics

Official routes: USCIS

Job description

About the role

Full text from the employer, as published on Arbeitnow, arranged into sections. Nothing added or removed.

01About Us

Harmattan AI is a next-generation defense prime building autonomous and scalable defense systems. Following the close of a $200M Series B, valuing the company at $1.4 billion, we are expanding our teams and capabilities to deliver mission-critical systems to allied forces.

Our work is guided by clear values: building technologies with real-world impact, pursuing excellence in everything we do, setting ambitious goals, and taking on the hardest technical challenges. We operate in a demanding environment where rigor, ownership, and execution are expected.

02About the Role

As an RF Engineer (GNSS) in the Hardware (Electronics) team, you will own the radionavigation architecture of our products. Our systems need high-precision navigation and robust connectivity in contested, complex environments, and you will be the expert responsible for the RF subsystems, from antenna design to integration and compliance. You will design custom GNSS antennas and receiver modules, extend them towards CRPAs for GNSS-denied operations, and see each design through simulation, lab validation and flight tests.

Based in Lausanne, Switzerland.

03Responsibilities

  • Antenna Design: Design custom GNSS antennas and receiver modules for our products, and extend the work towards CRPAs (Controlled Reception Pattern Antennas) for GNSS-denied environments.

  • Antenna Integration: Integrate all antennas (GNSS, radio link) into the drones, validating through simulation (gain diagrams) and real-life lab and flight testing.

  • GNSS Test Bench: Develop, maintain and configure the GNSS test bench to simulate satellite constellations and interference scenarios.

  • RF Measurement: Run hands-on characterization with network and spectrum analyzers, and simulate new antenna iterations with EM software.

  • Electromagnetic Compatibility: Lead EMC troubleshooting and pre-compliance testing, identifying and removing blockers early.

  • PCB Collaboration: Work with PCB designers to review routing, shielding and RF layout.

  • Architecture Ownership: Review and own the RF architecture across product lines, including link budgets and system-level RF performance.

  • Mentoring: Act as the team's RF subject matter expert, coaching junior engineers on RF layout principles and EMC mitigation.

04Candidate Requirements

  • Education: Bachelor's or Master's degree in Electrical Engineering, RF Engineering, Telecommunications or a related field.

  • Experience: Proven track record taking complex wireless devices from concept to mass production, including clearing strict EMC compliance hurdles. Background in aerospace, commercial drones or GNSS products is a strong advantage.

  • GNSS: Solid grounding in GNSS, including hands-on use of a GNSS test bench to simulate edge-case environments, and an understanding of effects such as multipath.

  • Antenna Design: Experience designing custom antennas under tight mechanical and space constraints, with EM simulation tools.

  • RF & EMC: Strong command of RF fundamentals and measurement equipment (network and spectrum analyzers); comfortable working in an anechoic chamber.

  • Mindset: Analytical, meticulous, structured and resilient; a hands-on problem-solver who works autonomously and collaborates well.

  • Communication & Influence: Excellent written and verbal communication, capable of leading diverse principals, from junior members to senior executives.

  • Commitment: 100% dedication to Harmattan AI's mission, vision, and ambitious growth plans, ready to go the extra mile to ensure operational excellence.

We look forward to hearing how you can help shape the future of autonomous defense systems at Harmattan AI.

Find more English Speaking Jobs in Switzerland on Arbeitnow

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗