TITLE 32 SURFACE MAINTENANCE MECHANIC LEADER WL-5801-10
Army National Guard Units is hiring for the position of TITLE 32 SURFACE MAINTENANCE MECHANIC LEADER WL-5801-10 in Eleanor, West Virginia, United States. The listing describes it as a full-time position.
DGJ summary of this job
Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.
Army National Guard Units is hiring for the position of TITLE 32 SURFACE MAINTENANCE MECHANIC LEADER WL-5801-10 in Eleanor, West Virginia, United States. The listing describes it as a full-time position.
The advert names logistics as a skill for this role.
Pay stated in the listing: $34.13 - $39.77 per hour.
Benefits mentioned in the advert: pension or retirement plan.
Visa sponsorship is not mentioned. Applicants from outside United States should check the official work permit route before applying.
Dev Global Jobs found this job on USAJobs on Nov 20, 2026; applications close on Dec 20, 2026.
- Employer
- Army National Guard Units
- Location
- Eleanor, West Virginia, United States
- Job type
- Full-time
- Pay
- $34.13 - $39.77 per hour
- Found
- Nov 20, 2026 on USAJobs
- Closes
- Dec 20, 2026
- Employer text
- 911 words, about 4 min to read
- Apply only on the official page (usajobs.gov). Dev Global Jobs is not the employer and never asks for a fee.
- Mirror the skills the advert names (logistics) in your CV where you really have them; applicant tracking systems look for these words.
- Plan to apply before Dec 20, 2026.
- Read the employer’s full text below (about 4 min) before you apply.
- Build or check your CV with the free DGJ CV Builder.
DGJ Insight
Our own data about this role and place, from official statistics and our live job index.
This job's listed pay is 13% below the benchmark.
Source: OECD Average annual wages, 2025
- H-1B specialty occupation: Employer petition, bachelor's degree or higher in the specialty; annual cap and lottery
- L-1 intracompany transferee: Employees of a related company abroad transferring to a US office
- O-1 extraordinary ability: Evidence of extraordinary ability in sciences, arts, education, business or athletics
Official routes: USCIS
About the role
Full text from the employer, as published on USAJobs, arranged into sections. Nothing added or removed.
MINIMUM MILITARY GRADE: E5 MAXIMUM MILITARY GRADE: E7 Your rank MUST be included somewhere within your resume. You must fully substantiate in your own words that you meet the requirements listed below. When explaining minimum requirements and specialized experience you must give examples. Do not copy from the vacancy announcement or the position description. Explain it in your own words and give examples to be considered for this vacancy.
All personnel applying for this position who do not meet the minimum military grade requirement MUST provide the proper signed memorandum from your respective Military Personnel Office (MILPO for ARNG, FSS for ANG) to prove eligibility to obtain the required grade upon accepting the position. ENLISTED APPLICANTS ONLY All enlisted applicants who exceed the maximum military rank must provide a memorandum explaining if selected for this position, you will accept a voluntary reduction in rank.
The memorandum must be submitted WITH your application to be considered for this position. GENERAL EXPERIENCE: Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work. SPECIALIZED EXPERIENCE: Experience which demonstrates the ability to plan, organize, and lead the work of others in fields directly related the repair function of this occupational series.
Must have the ability to perform administrative functions; to read and interpret a variety of technical publications used in the repair of supported equipment. The ability to provide guidance to others in work related directly to this occupational series.
Position Description # D1287000 POSITION DUTIES: This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The purpose of this position is to serve as a working leader of three or more Surface Maintenance Mechanics, WG-5801-10. Performs mechanic duties involving maintenance, troubleshooting, repair, inspection, and/or overhaul of a variety of combat, tactical, commercial, and special purpose vehicles and equipment.
Provides technical subordinate guidance and group leadership to employees on the team. MAJOR DUTIES: (1) Leader Duties: a. Assigns work orders to specific crewmembers and selects workers for various jobs on the basis of knowledge, skills, and abilities. Passes on to workers instructions received from the supervisor, demonstrates proper work methods, and starts work. Insures that needed plans, blueprints, material, and tools are available, and that needed stock is obtained from supply locations.
Works along with other workers and sets pace performing non-supervisory repair work of the same kind and level as that done by the group led. Work performed by the incumbent involves troubleshooting, maintenance and major repairs on heavy-duty mobile equipment, combat, tactical, and automotive vehicles. b. Assures that there is enough work to keep the work crew busy.
Checks work in progress and when finished for compliance with supervisor's instructions, work orders, and established shop procedures on work sequence, procedures, methods and deadlines; and directs or advises other workers to follow supervisor's instructions and to meet deadlines. Answers workers' questions regarding procedures, policies, written instructions, and other directives. Interprets work instructions and assists lower graded repairers or trainees in the more difficult and complex tasks.
Provides information to the supervisor on status and progress of work, causes of delays, and overall work operations and problems. Assures that safety and housekeeping rules are followed. (2) Non-Supervisory Duties: a. Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles.
This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment.
Incumbent troubleshoots repairs and may overhaul major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with Modification Work Orders, Technical Manuals, Lubrication Orders, Maintenance Bulletins, Regulations or management policies.
Incumbent may repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. b. Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. c.
Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems.
May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. d. Independently performs repairs and maintenance functions with little or no supervision in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps.
Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team". Recovers and evacuates inoperable vehicles from the unit location of breakdown. (3) Performs other duties as assigned.
Ask CSI about this job
Answers link to jobs and tools on Dev Global Jobs.
Review Dev Global Jobs
Used this site to find a job? Tell other job seekers what worked and what did not.