Dev Global Jobs
Technology

Advanced R&D - Physical Design Engineer

Kandou AiSaint-SulpiceFull-timeSalary not listed · Typical payPosted Nov 17, 2026

Kandou Ai is hiring for the position of Advanced R&D - Physical Design Engineer in Saint-Sulpice. It is listed as a full-time position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

Kandou Ai is hiring for the position of Advanced R&D - Physical Design Engineer in Saint-Sulpice. It is listed as a full-time position.

Reading the advert, the employer asks for 5+ years of experience.

Skills and tools named in the text include Python and data analysis.

The employer does not state a salary in this listing; the DGJ Country Salary Calculator gives official average pay figures by country.

Dev Global Jobs found this job on Arbeitnow on Nov 17, 2026.

Employer
Kandou Ai
Location
Saint-Sulpice
Job type
Full-time
Pay
Not stated by the employer
Experience asked
5+ years
Found
Nov 17, 2026 on Arbeitnow
Employer text
398 words, about 2 min to read
Skills named in the advert
Pythondata analysis
Before you apply
  • Apply only on the official page (arbeitnow.ch). Dev Global Jobs is not the employer and never asks for a fee.
  • Compare your own experience with the 5+ years the advert asks for, and show it clearly near the top of your CV.
  • Mirror the skills the advert names (Python and data analysis) in your CV where you really have them; applicant tracking systems look for these words.
  • Read the employer’s full text below (about 2 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Job description

About the role

Full text from the employer, as published on Arbeitnow, arranged into sections. Nothing added or removed.

At Kandou, we are redefining the economics of AI infrastructure. Our mission is to democratise AI by significantly reducing the Total Cost of Ownership (TCO) of hardware systems, a critical barrier to scalable adoption.

Our proprietary MIMO-over-copper technology powers a high-performance, chiplet-based AI memory fabric that is both scalable and energy-efficient. Unlike traditional interconnects, our solution reduces power consumption significantly while preserving high bandwidth and ultra-low latency - unlocking unprecedented efficiency for AI training and inference at scale.

Job title: Advanced R&D - Physical Design Engineer

Location : Lausanne, Switzerland

The Physical Design (PD) Engineer translates high-speed communication IP digital designs into physical GDSII layouts for advanced FinFET nodes. You will bridge logic design, owning block-to-chip implementation from netlist to final physical sign-off, ensuring PPA (Power, Performance, and Area) targets are met.

 

01Immediate key objective

  • Drive block-level physical implementation-covering synthesis, SDC constraints, floorplanning, placement, CTS, and routing-meeting strict frequency, area, and power targets.

  • Execute timing closure across multiple corners and modes (MCMM) utilizing static timing analysis (STA) and generating targeted ECOs.

  • Drive full physical verification closure sign-off in deep-submicron FinFET technologies.

02Responsibility

  • Own block synthesis, floorplanning, placement optimization, CTS, and routing.

  • Develop and refine SDC constraints to ensure design intent matches physical realization.

  • Collaborate with the digital design team to resolve logic or architectural bottlenecks affecting P&R convergence.

  • Generate progress reports, document implementation flows, and prepare sign-off packages for tape-out.

03Required Experience

  • 5+ years of hands-on physical design experience focusing on synthesis, SDC constraints, CTS, and place and route for high-speed systems.

  • Strong technical background in deep-submicron CMOS/FinFET physical effects, crosstalk, and high-frequency clock network design.

  • Proven experience of taking complex blocks from netlist through successful physical implementation.

  • Direct experience with advanced low-power implementation techniques (UPF, power gating).

  • Proven tape-out experience in advanced FinFET nodes (e.g., 7nm, 5nm, or 3nm).

  • Experience handling complex block-to-chip hierarchical assembly, pin placement, and top-level routing constraints..

04Required Skills

  • Expert proficiency with industry-standard implementation and sign-off tools (e.g., Cadence Genus/Innovus/Tempus or Synopsys Design Compiler/ICC2/PrimeTime, and Calibre).

  • Deep understanding of SDC creation, and MCMM timing management.

  • Strong scripting skills (Tcl, Python) for flow automation and design data analysis.

  • Analytical mindset to debug congestion routing issues, and complex timing violations.

  • Self-motivated with strong sense of ownership; effective communicator and team player

05Required Education

  • Masters or Ph.D. in E.E., Communications or other relevant fields

https://kandou.ai/

Find more English Speaking Jobs in Switzerland on Arbeitnow

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗