Dev Global Jobs
Government · Technology

Test and Evaluation Engineer - Direct Hire Authority

Air Force Materiel CommandMultiple Locations, United StatesFull-time$89,508 - $138,370 per yearPosted Nov 17, 2026Closes Dec 17, 2026

This listing is for a Test and Evaluation Engineer - Direct Hire Authority role at Air Force Materiel Command, in Multiple Locations, United States. The listing describes it as a full-time position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

This listing is for a Test and Evaluation Engineer - Direct Hire Authority role at Air Force Materiel Command, in Multiple Locations, United States. The listing describes it as a full-time position.

From the advert, the main requirements are 1+ years of experience.

The advert mentions Excel and curriculum among the skills and tools for this role.

Pay stated in the listing: $89,508 - $138,370 per year.

Benefits mentioned in the advert: learning budget.

Visa sponsorship is not mentioned. Applicants from outside United States should check the official work permit route before applying.

Dev Global Jobs found this job on USAJobs on Nov 17, 2026; applications close on Dec 17, 2026.

Employer
Air Force Materiel Command
Location
Multiple Locations, United States
Job type
Full-time
Pay
$89,508 - $138,370 per year
Experience asked
1+ years
Found
Nov 17, 2026 on USAJobs
Closes
Dec 17, 2026
Employer text
1,115 words, about 5 min to read
Skills named in the advert
Excelcurriculum
Before you apply
  • Apply only on the official page (usajobs.gov). Dev Global Jobs is not the employer and never asks for a fee.
  • Compare your own experience with the 1+ years the advert asks for, and show it clearly near the top of your CV.
  • Mirror the skills the advert names (Excel and curriculum) in your CV where you really have them; applicant tracking systems look for these words.
  • Plan to apply before Dec 17, 2026.
  • Read the employer’s full text below (about 5 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 17, 2026
Pay benchmark
Average wage, United States
$86,977 average / year

This job's listed pay is 31% above the benchmark.

This job: $89,508 to 138,370

Source: OECD Average annual wages, 2025

Work permit route
  • H-1B specialty occupation: Employer petition, bachelor's degree or higher in the specialty; annual cap and lottery
  • L-1 intracompany transferee: Employees of a related company abroad transferring to a US office
  • O-1 extraordinary ability: Evidence of extraordinary ability in sciences, arts, education, business or athletics

Official routes: USCIS

Job description

About the role

Full text from the employer, as published on USAJobs, arranged into sections. Nothing added or removed.

Experience requirements are described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional Engineer Positions. BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering.

To be acceptable, the program must:(1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following: (Click here for detailed explanation of each of these items)1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2.

Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A.

The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4.

Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: Applicants must have at least 1 year (52 weeks) of specialized experience at the next lower broadband NH-02, equivalent to the next lower grade GS-11 or equivalent in other pay systems.

Specialized experience includes mastery of advanced professional systems engineering concepts, principles, practices, standards, methods, techniques, materials, and equipment to effectively apply advanced engineering theories, principles, and concepts to development, execution, and advisory services. NOTE: Due to the use of 120-day rosters, this period of experience may be completed within 120 days of the closing date of this announcement.

Ideal Candidate The ideal candidate is an experienced, forward-thinking engineer with a strong foundation in professional engineering principles and hands-on experience in the planning, execution, and reporting of developmental or operational test and evaluation (T&E) programs.

A successful candidate possesses proven technical expertise in formulating test plans, developing Methods of Test (MOT), analyzing complex engineering and flight data, and diagnosing system performance issues across aerospace, weapons, or support systems. They excel at collaborating across multidisciplinary teams, translating complex technical findings into actionable reports for decision-makers, and navigating the DoD acquisition and test lifecycle with minimal technical supervision.

2 years as an engineer in a flight test squadron desired Any years working as an engineer in fighter flight test desired 2 years as an engineer inside the 96TW desired KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Knowledge of test engineering concepts, principles, practices, standards, methods, techniques, materials, and equipment to effectively apply engineering theories, principles, and concepts to project development and execution.

Knowledge of aircraft ground systems, and support equipment sufficient to plan, design, test, troubleshoot, evaluate, and oversee the development and/or sustainment of highly complex weapons and/or aircraft systems. Knowledge of the principles of planning and program management; standard acquisition regulations, practices, and procedures; and other engineering disciplines.

Skill in preparing design concepts, formulating working drawings, expressing proposals, and establishing requirements for technical objectives and characteristics. Ability to communicate clearly, concisely, and technical accuracy, both orally and in writing as well as work in a professional manner with peers, management, contractors, academia, and other agencies.

Ability to prepare design concepts, convey ideas, and formulate working drawings using computer aided design and drafting programs, and/or project management/scheduling software programs. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.

You will receive credit for all qualifying experience, including volunteer experience.

Serves as a ground and/or airborne test engineer for the 96OG as a test engineer the major responsibilities include test planning, conduct and reporting on various types of ground air-to-air and/or air-to-ground test programs. Plans and carries out the collection and analysis of information, data, and standards used by the assigned organization to perform test engineering tasks. Carries out special projects designed to facilitate full use of the incumbents training and development.

Keeps abreast of emerging technologies and professional developments to maintain currency in the field and for application to work assignments.

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗