Dev Global Jobs
Government · Business

Nondestructive Tester

U.S. Army Aviation and Missile CommandCorpus Christi, Texas, United StatesFull-time$32.46 - $41.37 per hourPosted Nov 18, 2026Closes Nov 27, 2026

U.S. Army Aviation and Missile Command has an opening for a Nondestructive Tester in Corpus Christi, Texas, United States. It is listed as a full-time position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

U.S. Army Aviation and Missile Command has an opening for a Nondestructive Tester in Corpus Christi, Texas, United States. It is listed as a full-time position.

The listing gives the pay as $32.46 - $41.37 per hour.

The advert does not mention visa sponsorship. If you would move to United States for this job, check the official work permit route first (DGJ Insight lists it where we have it).

Dev Global Jobs found this job on USAJobs on Nov 18, 2026; applications close on Nov 27, 2026.

Employer
U.S. Army Aviation and Missile Command
Location
Corpus Christi, Texas, United States
Job type
Full-time
Pay
$32.46 - $41.37 per hour
Found
Nov 18, 2026 on USAJobs
Closes
Nov 27, 2026
Employer text
975 words, about 4 min to read
Before you apply
  • Apply only on the official page (usajobs.gov). Dev Global Jobs is not the employer and never asks for a fee.
  • Plan to apply before Nov 27, 2026.
  • Read the employer’s full text below (about 4 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 17, 2026
Pay benchmark
Average wage, United States
$86,977 average / year

This job's listed pay is 13% below the benchmark.

This job: $66,560 to 85,280

Source: OECD Average annual wages, 2025

Work permit route
  • H-1B specialty occupation: Employer petition, bachelor's degree or higher in the specialty; annual cap and lottery
  • L-1 intracompany transferee: Employees of a related company abroad transferring to a US office
  • O-1 extraordinary ability: Evidence of extraordinary ability in sciences, arts, education, business or athletics

Official routes: USCIS

Job description

About the role

Full text from the employer, as published on USAJobs, arranged into sections. Nothing added or removed.

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

Current Civilian Employees of the Command Interagency Career Transition Assistance Plan Land Management Workforce Flexibility Act Military Spouses, under Executive Order (E.O.) 13473 Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, DoD Retained Grade Preference Eligible Veterans Employment Opportunity Act (VEOA) of 1998 Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social).

You will receive credit for all qualifying experience, including volunteer experience. There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision.

Minimum Qualifications WG-09 (Screen Out Element): Ability to do the work of an Nondestructive Tester without more than normal supervision.

Can interpret and identify indications that are the result of discontinuities such as cracks, pipe, inclusions, nonmetallic stringers or forging bursts; and then accepts or rejects parts in accordance with authorized acceptance criteria; and set up, calibrate, and safely operate fluorescent penetrate inspection equipment such as spray guns, dip tanks, wash booths, dryers, pressure flow meters, optical magnifiers, and other manual and automatic processing equipment. - Failure to meet this Screen Out Element will result in an ineligible rating.

Minimum Qualifications WG-10 (Screen Out Element): Ability to do the work of an Nondestructive Tester without more than normal supervision. Perform under the guidance of a Level II operator, the trainee is responsible for Radiographic (RT), Ultrasonic (UT), and Eddy Current (EC) method of NDT inspection requiring setup, calibration, and safe operation of test equipment for each area. - Failure to meet this Screen Out Element will result in an ineligible rating.

Minimum Qualifications WG-11 (Screen Out Element): Ability to do the work of an Nondestructive Tester without more than normal supervision.

Setup and safe operation of both conventional and real time X-ray machines to make RT exposures of aircraft nonmetallic structures and metallic castings, forgings, weldments, other wrought products; and using UT methods determines the precise type, magnitude, and orientation of defects such as cracks, inclusions, incomplete fusion, delamination, and other anomalies. - Failure to meet this Screen Out Element will result in an ineligible rating.

Selective Placement Factor #1 WG-11: This position requires a valid Non-Destructive Tester (NDT) Level II certification in Magnetic Particle (MT), Fluorescent Penetrant Inspection (PT) of Non-Destructive Tester (NDT) inspection and NDT Level II certifications in Radiographic (RT), Ultrasonic (UT), and Eddy Current (EC) methods of Non-Destructive Testing (NDT) in order to accomplish the duties of PD AA09324.

In accordance with NAS 410 (NAS Certification and Qualification of Nondestructive Test Personnel and CCAD 702-52. Selective Placement Factor #2 WG-11: Using UT methods determines the precise type, magnitude, and orientation of defects such as cracks, inclusions, incomplete fusion, delaminations, and other anomalies.

Responsible for Eddy current (EC) method of NDT requiring setup, calibration, and safe operation of EC test equipment using surface, encircling and inside coils and gap probes with analog and impedance plane display instruments. Responsible for Radiographic (RT) methods of NDT inspection requiring setup and safe operation of both conventional and real time X-ray machines to make RT exposures of aircraft nonmetallic structures and metallic castings, forgings, & weldments.

Ability To Do The Work Of The Position Without More Than Normal Supervision Screen Out Ability to Interpret Instructions, Specification, etc. (includes blueprint reading) Ability To Use and Maintain Tools and Equipment Dexterity and Safety Knowledge of Metals Technical Practices (theoretical, precise, artistic) Use of Measuring Instruments PHYSICAL EFFORT: Work in this trade requires the worker to stand, stoop, bend, and reach.

The worker will frequently handle items weighing up to 10 pounds and often lift and carry assemblies weighing up to 35 pounds without assistance. Hoists, hand trucks, lifts, and other employees are available to assist when handling heavy or awkward items. Eye fatigue occurs from working under black light and viewing radiographs. The worker is required to pass annual vision tests for acuity and color perception.

01WORKING CONDITIONS

Works is clean, well-lighted and well-ventilated production shop areas. Wears safety shoes, glasses and other protective clothing as required. Exposed to solutions and generally oily parts which may cause dermatitis or allergy conditions. Wears protection clothes as working conditions may warrant. Although working behind appropriate shielding, this worker must operate equipment, which produce ionizing radiation for which some exposure is possible.

Working conditions have been considered in the evaluation of this position.

This is a developmental position. If the selection should be at the lower grade level the incumbent will perform duties under closer than normal supervision.

Assignments become progressively more difficult until the full performance level is reached.,Use RT methods determine the precise type, magnitude, and orientation of defects such as cracks, porosity, inclusions, incomplete fusion, shrinkage, segregation, incorrect assembly, and other anomalies.,Responsible for processing radiographic film and/or paper for either automated or manual methods of film processing as required.,Using UT methods determines the precise type, magnitude, and orientation of defects such as cracks, inclusions, incomplete fusion, delaminations, and other anomalies.,Perform EC test examinations using single and double absolute coils and self-comparison and external comparison differential coils on aircraft electrically conductive nonmetallic structures and metallic products.

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗