Dev Global Jobs
Technology

(Senior) Electrical Systems Engineer, Power, Harness Design & EMC (m/f/d)

RobCoMunich, GermanyFull-timeSalary not listed · Typical pay in GermanyPosted Nov 19, 2026

RobCo has an opening for a (Senior) Electrical Systems Engineer, Power, Harness Design & EMC (m/f/d) in Munich, Germany. The listing describes it as a full-time, senior position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

RobCo has an opening for a (Senior) Electrical Systems Engineer, Power, Harness Design & EMC (m/f/d) in Munich, Germany. The listing describes it as a full-time, senior position.

From the advert, the main requirements are 3+ years of experience.

The advert mentions SolidWorks and CAD among the skills and tools for this role.

The employer does not state a salary in this listing; DGJ Insight below shows an official pay benchmark for the place where one exists.

Benefits mentioned in the advert: flexible hours.

Visa sponsorship is not mentioned. Applicants from outside Germany should check the official work permit route before applying.

Dev Global Jobs found this job on Arbeitnow on Nov 19, 2026.

Employer
RobCo
Location
Munich, Germany
Job type
Full-time
Level (from the title)
senior
Pay
Not stated by the employer
Experience asked
3+ years
Found
Nov 19, 2026 on Arbeitnow
Employer text
911 words, about 4 min to read
Skills named in the advert
SolidWorksCAD
Before you apply
  • Apply only on the official page (arbeitnow.com). Dev Global Jobs is not the employer and never asks for a fee.
  • Compare your own experience with the 3+ years the advert asks for, and show it clearly near the top of your CV.
  • Mirror the skills the advert names (SolidWorks and CAD) in your CV where you really have them; applicant tracking systems look for these words.
  • Read the employer’s full text below (about 4 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 20, 2026
Pay benchmark
Average wage, Germany
EUR 54,840 average / year

Source: OECD Average annual wages, 2025

Cost of living · Munich
87 vs New York = 100

UN living-cost index for Munich (ICSC post adjustment 52.7), as of 1 Nov 2026.

Source: ICSC post adjustment classifications (icsc.un.org)

Work permit route
  • EU Blue Card: Recognised degree and a job offer above the salary threshold
  • Skilled worker visa (Fachkräfte): Recognised qualification and a job offer
  • Opportunity Card (Chancenkarte): Points-based job search for up to one year

Official routes: Make it in Germany (Federal Government portal)

Job description

About the role

Full text from the employer, as published on Arbeitnow, arranged into sections. Nothing added or removed.

01About the Role at RobCo

RobCo is building the category of Autonomous Industrial Robotics and we're doing it fast. We believe that automating the ordinary frees humans to do the extraordinary, and we're building the end-to-end robotics infrastructure to make that possible - hardware, software, and AI in one stack that just works.

 

As our (Senior) Electrical Systems Engineer (m/f/d), you own the electrical backbone of our robots, from industrial manipulators to our bimanual platform Alfie.

In this key role, you are responsible for the complete electrical system of a robot, not one section of it. You define the power, grounding and shielding concepts, engineer the wire harnesses through moving joints, and take them from first prototype to series supply. If you come from automotive Bordnetz development, you will find familiar work at a very different pace: concepts turn into running prototypes within weeks, and your decisions go straight into products at our customers.

02Your Responsibilities

  • Own the electrical system architecture of our robots: power distribution concept, load distribution, fusing (Absicherung), wire cross-section sizing and data signal integrity.

  • Define grounding/earthing and shielding concepts (Versorgungs- und Massekonzepte) and design for EMC from the first concept onwards.

  • Plan and support EMC pre-compliance and certification testing, analyse findings and implement robust fixes.

  • Specify wire harnesses, connectors, contacts and cables, and create wiring diagrams (Kabelschaltpläne), harness drawings and BOMs that suppliers can produce from directly.

  • Route harnesses through rotating joints and moving axes: select flex- and torsion-rated cables and drive cable life tests together with mechanical engineering.

  • Work closely with our electronics team on interfaces, connectors, power distribution boards and safety circuits.

  • Take harnesses from first prototype to series: supplier selection, first samples, change management, incoming inspection and quality standards. Use your expertise to inform and provide feedback on assembly procedures, build initial samples and support production engineers with new assembly procedures.

  • Work hand in hand with our prototyping technicians, who build your designs, and turn their feedback into better harnesses.

  • Support bring-up, integration and root-cause analysis of electrical issues in prototypes and in the field.

  • Set up our standards and processes for electrical systems engineering, including the choice of E-CAD tooling.

03We're looking for someone who has

  • Degree in electrical engineering, mechatronics, vehicle electronics or a comparable field.

  • 3+ years of experience in Bordnetz or wire harness development, e.g., in automotive, commercial vehicles, rail, aerospace or machine building. Robotics experience is not required.

  • Proven hands-on experience with grounding, shielding and EMC design, ideally including EMC testing.

  • Solid knowledge of connectors, contacts, cable types, wire sizing and fusing, and confidence creating wiring diagrams and harness drawings.

  • Experience with cables in moving applications (e.g., doors, seats, drag chains or robot joints) is a plus.

  • Experience with an E-CAD tool such as E3.series, Capital, LDorado or SOLIDWORKS Electrical.

  • Experience taking harnesses into series with external suppliers, including change management.

  • A strong ownership mindset and the drive to build up a discipline in a fast-growing company.

  • Language skills: either fluent German plus solid working English, or excellent English (no German required)

04Why join RobCo?

  • Develop modular, software-defined robotics solutions with us that set new standards in automation.

  • Help us build robots equipped with state-of-the-art AI that perceive their environment, analyze data, and make intelligent decisions in real time.

  • As part of a very dynamic and fast-growing scale-up, you will take on responsibility from day one, drive your own projects, and see the direct impact of your work.

  • Flat hierarchies, open communication, and regular 360° feedback enable fast decisions and support your professional and personal development.

  • Wellpass membership (7,200+ studios across Germany), regular team events, and a team that takes both the work and the culture seriously.

  • Flexible working hours, a modern office, and - depending on the role - the option to work from home.

  • Regular team events - from relaxed beer & pizza nights on the rooftop terrace to shared experiences on ski trips or at Oktoberfest.

05About RobCo

Founded in Munich in 2020, RobCo leads the transition toward fully Autonomous Industrial Robotics. Our mission is to deploy RobCo in every factory - solving the industrial labor shortage through end-to-end robotics that just works. Powered by Physical AI, our solutions combine a scalable modular hardware architecture with intelligent software that continuously learns and improves, requiring zero upfront investment through our Robotics-as-a-Service (RaaS) model.

We solve our customers' most pressing pain points - labor shortage, cost pressure, workplace safety, and national reshoring - across the full spectrum of Autonomous Industrial Robotics. In October 2026, RobCo reached unicorn status with a valuation exceeding one billion US dollars, with its valuation doubling in less than nine months. With $200M raised from investors including Sequoia, Lightspeed, Lingotto, Kindred, Cherry Ventures, and the European Tech Collective, 225+ people globally, and 3.5M+ operating hours in the field, we are deploying robots in factories across Europe and the United States - with our US operations headquartered in Austin, TX, and our Bay Area Lab in San Francisco.

Don’t meet every single requirement? If you’re excited about this role but your past experience doesn’t align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles.

At RobCo, applicants are selected regardless of ethnic origin, religion, gender, age, disability, or sexual orientation. All decisions throughout the recruitment process are based solely on applicants’ qualifications, skills, knowledge, and experience, as well as relevant business requirements.

Find Jobs in Germany on Arbeitnow

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗