Dev Global Jobs
Government · Technology

General Engineer

Defense Logistics AgencyFort Belvoir, Virginia, United StatesFull-time$121,785 - $158,322 per yearPosted Nov 19, 2026Closes Dec 4, 2026

Defense Logistics Agency has an opening for a General Engineer in Fort Belvoir, Virginia, United States. It is listed as a full-time position.

Written by Dev Global Jobs

DGJ summary of this job

Our own short read of this listing, built only from the facts it gives. The employer’s original text follows further down.

Defense Logistics Agency has an opening for a General Engineer in Fort Belvoir, Virginia, United States. It is listed as a full-time position.

Reading the advert, the employer asks for 1+ years of experience.

Skills and tools named in the text include logistics and curriculum.

The listing gives the pay as $121,785 - $158,322 per year.

The advert does not mention visa sponsorship. If you would move to United States for this job, check the official work permit route first (DGJ Insight lists it where we have it).

Dev Global Jobs found this job on USAJobs on Nov 19, 2026; applications close on Dec 4, 2026.

Employer
Defense Logistics Agency
Location
Fort Belvoir, Virginia, United States
Job type
Full-time
Pay
$121,785 - $158,322 per year
Experience asked
1+ years
Found
Nov 19, 2026 on USAJobs
Closes
Dec 4, 2026
Employer text
937 words, about 4 min to read
Skills named in the advert
logisticscurriculum
Before you apply
  • Apply only on the official page (usajobs.gov). Dev Global Jobs is not the employer and never asks for a fee.
  • Compare your own experience with the 1+ years the advert asks for, and show it clearly near the top of your CV.
  • Mirror the skills the advert names (logistics and curriculum) in your CV where you really have them; applicant tracking systems look for these words.
  • Plan to apply before Dec 4, 2026.
  • Read the employer’s full text below (about 4 min) before you apply.
  • Build or check your CV with the free DGJ CV Builder.
Only on Dev Global Jobs

DGJ Insight

Our own data about this role and place, from official statistics and our live job index.

Updated Nov 19, 2026
Pay benchmark
Average wage, United States
$86,977 average / year

This job's listed pay is 61% above the benchmark.

This job: $121,785 to 158,322

Source: OECD Average annual wages, 2025

Work permit route
  • H-1B specialty occupation: Employer petition, bachelor's degree or higher in the specialty; annual cap and lottery
  • L-1 intracompany transferee: Employees of a related company abroad transferring to a US office
  • O-1 extraordinary ability: Evidence of extraordinary ability in sciences, arts, education, business or athletics

Official routes: USCIS

Job description

About the role

Full text from the employer, as published on USAJobs, arranged into sections. Nothing added or removed.

To qualify for a General Engineer, your resume and supporting documentation must support: A. Basic Requirement: A bachelor's degree or higher in professional engineering.

To be acceptable, the program must: (1) be in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR A combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following: Professional Registration or Licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the Basic Requirements above.

The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in the Basic Requirements above.

Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field (e.g., engineering technology physics, chemistry, architecture, computer science, mathematics, hydrology, or geology) may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience (e.g., in interdisciplinary positions). AND B. Specialized Experience: One year of specialized experience that equipped you with the particular competencies to successfully perform the duties of the position and is directly in or related to this position.

In addition to meeting the Basic Requirement above, to qualify for the GS-13 grade level, specialized experience must be at the GS-12 grade level or equivalent under other pay systems in the Federal service, military, or private sector. Applicants must meet eligibility requirements including time-in-grade (General Schedule (GS) positions only), time-after-competitive appointment, minimum qualifications, and any other regulatory requirements by the cut-off/closing date of the announcement.

Creditable specialized experience includes: Managed MilCon and SRM fuels projects by applying engineering or architectural theories, principles, concepts, standards, and methods in environmental, financial, and engineering practices. Planned, designed, constructed large and highly complex projects and fuel systems by utilizing least two or more engineering (Architectural, Civil, Electrical, Mechanical, Structural, Petroleum, and Industrial) principles, techniques, and procedures.

Analyzed Unified Facilities Criteria (UFC), OSHA, NFPA, American Petroleum Institute (API) and other industry standards as they apply to a wide range of engineering requirements and problems. Coordinate and execute multiple MilCon/SRM, and other construction projects involving complex engineering features and requirements.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

This position serves as a Project Engineer for the Defense Logistics Agency (DLA) Energy in the Facility Sustainment Directorate.,Serves as the project engineer and construction manager directly responsible for the accomplishment of major fuels Sustainment Restoration Modernization (SRM) and Military Construction (MILCON) projects for their assigned AOR.,Key duties include project engineering and oversight of all aspects of DLA Energy SRM projects from cradle to grave to include performing the duties of the Accountable Receipt Official for the assigned AOR.,Prepares point papers, conducts briefings, attends conferences and meetings, and takes all other actions necessary to complete the project on time and within the programmed budget.,Provides guidance and technical advice to SRM programs, classification determinations, project prioritization, site approvals, recurring maintenance plans, inspection services, life cycle cost analysis and common host-tenant support issues.,Engages stakeholders and exercises engineering leadership during project development phase to ensure designs comply with applicable engineering practices and code requirements for petroleum facilities.,Responsible for assessing and approving project technical closure and is required to provide required documentation and support required for project financial closure in accordance with DLA policies.

CSI

Ask CSI about this job

Answers link to jobs and tools on Dev Global Jobs.

Get jobs like this

The best new matches, once a week. Free, one click to stop.

Community

Review Dev Global Jobs

Used this site to find a job? Tell other job seekers what worked and what did not.

Write a review on TrustpilotIt takes about two minutes↗